In order to harmonise the communication systems between the train and the railway control centres over the European territory, a GSM-R (Global System for Mobile communications-Railways) communication network is progressively deployed along the European railway network. However, the GSM-R communications on board high speed trains can be disturbed by the transient electromagnetic (EM) disturbances induced by the sliding contact between the catenary and the pantograph. In order to study the immunity of the embedded GSM-R communication system against these transient electromagnetic disturbances, the transient interferences induced on the GSM-R antennas on board trains, were characterised in terms of time and amplitude parameters. Measurement campaigns were carried out in France to collect a large number of induced EM interferences on GSM-R antennas fixed on the train roof. With the ultimate goal of generating transient noise scenarios representative of those detected by the antennas, and performing immunity tests in laboratory, statistical distributions of the characteristics (rise time, time duration, repetition rate, amplitude) of the transients are presented. This paper presents the different steps of the analysis of the transient disturbances and the generation of the transient EM scenarios.

To insure interoperability of the transeuropean trains, new transmission systems (GSMR, Eurobalise) are developed in order to permit communications between trains and control centres. These systems have to be available and safe from an electromagnetic point of view, but the normalized methods to characterize electromagnetic noise in railway environment are not convenient for these applications. This paper presents new experimental methods to characterize the electromagnetic noise on board trains which are studied in the framework of the European project "Railcom". The results of measurements realized both in time and in frequency domains, are analysed and some conclusions can be used as a first step to define a new standard for the considered systems.

No abstract

No abstract

As many other industrial environments, the railway electromagnetic environment is characterized by a large number of electromagnetic signals and disturbances. Among these, transient signals, with high energy level and wide frequency spectrum, represent an important threat to different signaling subsystems. In this paper, a new methodology dedicated to the detection and the characterization of the transient disturbances is presented. Based on a flexible and adjustable time-frequency analysis, this methodology is used to evaluate the impact of transient disturbances on a ground-to-train radio communication. A test bench was developed in order to validate the results of this evaluation.