In the presented manuscript an influence of the mesoporosity generation in commercial ZSM-5 zeolite on its catalytic performance in two environmental processes, such as NO reduction with ammonia (NH3-SCR, Selective Catalytic Reduction of NO with NH3) and NH3 oxidation (NH3-SCO, Selective Catalytic Oxidation of NH3) was examined. Micro-mesoporous catalysts with the properties of ZSM-5 zeolite were obtained by desilication with NaOH and NaOH/TPAOH (tetrapropylammonium hydroxide) mixture with different ratios (TPA+/OH-= 0.2, 0.4, 0.6, 0.8 and ∞) and for different durations (1, 2, 4 and 6 h). The results of the catalytic studies (over the Cu-exchanged samples) showed higher activity of this novel mesostructured group of zeolitic materials. Enhanced catalytic performance was related to the generated mesoporosity (improved Hierarchy Factor (HF) of the samples), that was observed especially with the use of Pore Directing Agent (PDA) additive, TPAOH. Applied desilication conditions did not influence significantly the crystallinity of the samples (X-ray diffraction analysis (XRD)), despite the treatment for 6 h in NaOH solution, which was found to be too severe to preserve the zeolitic properties of the samples. The modified porous structure and accessibility of acid sites (increased surface acidity determined by temperature programmed desorption of ammonia (NH3-TPD)) influenced the red-ox properties of copper species introduced by ion-exchange method (temperature programmed reduction with hydrogen (H2-TPR). Increased acidity of the micro-mesoporous samples, as well as the content of easily reducible copper species resulted in a significant improvement of Cu-ZSM-5 catalytic efficiency in the NH3-SCR and NH3-SCO processes.
Hydrotalcite originated mixed metal Cu-Mg-Al oxide system was doped with various amounts of cerium (0.5 or 3.0 wt%) and tested in the role of catalysts for the selective catalytic oxidation of ammonia to dinitrogen (NH 3-SCO) and the selective catalytic reduction of NO with ammonia (NH 3-SCR). The activating effect of cerium was observed in both studied processes. However, the CeO 2 loading is a very important parameter determining catalytic performance of the studied samples. It was shown that an introduction of cerium into Cu-Mg-Al mixed oxide resulted in its significant activation in the low-temperature NH 3-SCR process, independently of the CeO 2 loading and a decrease in the efficiency of the NO reduction at higher temperatures, which was more significant for the catalyst with the lower cerium content. In the case of the NH 3-SCO process, the introduction of cerium into Cu-Mg-Al mixed oxide resulted in the activation of the low temperature reaction, which was more intensive for the catalyst with lower cerium content. These effects were related to the presence of cerium in the form of crystallites of various size and therefore their different reducibility.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.