<p><strong>Objective</strong>:<strong> </strong>To develop a rapid, accurate, linear, sensitive and stability indicating RP-HPLC method for the determination of nilotinib in bulk and pharmaceutical dosage forms in the presence of its four related substances.</p><p><strong>Methods</strong>:<strong> </strong>The RP-HPLC method was developed for the chromatographic separation of nilotinib and its impurities by using waters Xterra RP-18 (150*4.6 mm, 3.5 µm) column with a mobile phase combination of 10 mM ammonium formate with pH-3.5 and acetonitrile in gradient mode. An injection volume of 20 µl. Flow rate was 1.0 ml/min and detection was carried a wavelength of 250 nm. The method was validated as per ICH guidelines.</p><p><strong>Results</strong>:<strong> </strong>The retention time for nilotinib and its four impurities were found to be 4.37, 7.40, 8.96, 10.21 and 10.87 min respectively. The linear regression analysis data for the calibration plots showed the good linear relationship in the concentration range of 0.04-3.0 ppm for the nilotinib impurities. The % recovery of nilotinib impurities was found to be 96.8-99.4% in the linearity range. The detection limit (LOD) values were about 0.014, 0.016, 0.005 and 0.03 ppm respectively and the quantification limit (LOQ) values were 0.042, 0.048, 0.014 and 0.09 ppm respectively. The % degradation at various stress conditions like acid, alkaline, oxidative, thermal and photolytic stress was found to be 8.92, 18.35,5.63, 0.88 and 3.89 respectively.</p><p><strong>Conclusion: </strong>The RP-HPLC method compatible with LC-MS was developed for the analysis of nilotinib and its four impurities. It was validated as per the ICH guidelines and found to be linear, robust, precise, accurate, sensitive, stability indicating and can be used for routine as well as stability analysis of capsule dosage forms as well as for drug substance.</p>

Background: Cefoperazone Sulbactam injection is a cephalosporin antibiotic with a β- lactamase inhibitor used in the treatment for intra abdominal infections, Urinary track infections, surgical infections, etc. The combination is not official in any of the pharmacopeia for their content and impurities determination. Introduction: The present study involves the development of a simple, rapid, accurate, sensitive and stability indicating RP-HPLC method for the quantitative estimation of Cefoperazone Sulbactam mixture and its impurities in bulk and pharmaceutical dosage forms. Methods: 0.005 M Tetrabutyl ammonium hydroxide buffer solution pH adjusted to 6.80 and Acetonitrile combination has been used in a gradient programme with a flow rate of 1.0 ml/min. The retention time of Cefoperazone and Sulbactam were observed at around 8.5 and 19.5 minutes respectively. The UV detection was carried out at a wavelength of 230 nm. The chromatographic separation was achieved using Waters xbridge C18-150*4.6 mm, 3.5 µm HPLC column. The method has been validated according to the current International Council for Harmonization (ICH) guidelines for the method validation parameters such as Specificity, linearity, range, accuracy, precision, robustness and sensitivity. Results: The validation results indicate that the method is specific, as the known impurities and other impurities formed during the forced degradation studies were not co-eluting with the main components. Moreover, all these impurities were found to be spectrally pure, proving the stability indicating power of the method. The linearity and range of the method is in the range of 0.01-150%, highly accurate (100.2%), precise (<1%) and robust. Conclusion: The proposed method was accurate and specific for the quantitative analysis of Cefoperazone and Sulbactam and their related impurities in the sterile mixture. Hence the proposed method can be used for the quantification of impurities in routine as well as stability analysis in the development as well as quality control laboratories.

Assay of lercanidipine hydrochloride in dosage forms using nucleophilic substitution reactionA simple and sensitive spectrophotometric method has been developed for the assay of lercanidipine hydrochloride (LER) in bulk and in formulations. The method is based on the formation of coloured species between the drug and 1,2-naphthaquinone-4-sulphonic acid sodium salt (NQS) by means of nucleophilic substitution reaction. Absorbance was measured at λmax= 460 nm. The method was analyzed statistically. The system obeyed the Beer's law in the range 20-100 μg mL-1. Molar absorptivity value was found to be 4.79 × 103L mol-1cm-1. Limits of detection and quantification were found to be as low as 0.04 and 0.13 μg mL-1. Precision (RSD, 0.4 %) and accuracy (recovery 99.2 ± 0.6 to 101.1 ± 0.8 %) of the developed method were evaluated.

No abstract

No abstract