Power applications of superconductors will be tremendously boosted if an effective method for magnetic flux immobilization is discovered. Here, we report the most efficient vortex-pinning mechanism reported so far which, in addition, is based on a low-cost chemical solution deposition technique. A dense array of defects in the superconducting matrix is induced in YBa(2)Cu(3)O(7-x)-BaZrO(3) nanocomposites where BaZrO(3) nanodots are randomly oriented. Non-coherent interfaces are the driving force for generating a new type of nanostructured superconductor. Angle-dependent critical-current measurements demonstrate that a strong and isotropic flux-pinning mechanism is extremely effective at high temperatures and high magnetic fields leading to high-temperature superconductors with record values of pinning force. The maximum vortex-pinning force achieved at 65 K, 78 GN m(-3), is 500% higher than that of the best low-temperature NbTi superconductors at 4.2 K and so a great wealth of high-field applications will be possible at high temperatures.

Boosting large-scale superconductor applications require nanostructured conductors with artificial pinning centres immobilizing quantized vortices at high temperature and magnetic fields. Here we demonstrate a highly effective mechanism of artificial pinning centres in solution-derived high-temperature superconductor nanocomposites through generation of nanostrained regions where Cooper pair formation is suppressed. The nanostrained regions identified from transmission electron microscopy devise a very high concentration of partial dislocations associated with intergrowths generated between the randomly oriented nanodots and the epitaxial YBa(2)Cu(3)O(7) matrix. Consequently, an outstanding vortex-pinning enhancement correlated to the nanostrain is demonstrated for four types of randomly oriented nanodot, and a unique evolution towards an isotropic vortex-pinning behaviour, even in the effective anisotropy, is achieved as the nanostrain turns isotropic. We suggest a new vortex-pinning mechanism based on the bond-contraction pairing model, where pair formation is quenched under tensile strain, forming new and effective core-pinning regions.

Chemical solution deposition (CSD) is a very competitive technique to obtain epitaxial films and multilayers of high quality with controlled nanostructures. Based on the strong attractiveness from the cost point of view, the production of long length coated conductors based on the CSD approach is being extensively developed. The trifluoroacetate route (TFA) is the most widely used route to achieve epitaxial YBa 2 Cu 3 O 7 (YBCO) layers with high critical currents, however a deep understanding of all the individual consecutive processing steps, as well as their mutual influence and relationship, is required to achieve superconducting materials with high performance. In this work, we review advances in the knowledge of all the steps relevant to the preparation of YBCO thin films based on TFA precursors as a CSD methodology: solution preparation and deposition, pyrolysis processes, intermediate phase evolution, nucleation and growth phenomena, microstructural evolution and its influence on percolating supercurrents, as well as vortex pinning by natural existing defects. Finally, we discuss the open issues still existing in the TFA approach, particularly that of film nanostructuration, and we provide a future outlook for this outstanding methodology.

This manuscript reports on the recent progress and the remaining materials challenges in the development of coated conductors (CCs) for power applications and magnets, with a particular emphasis on the different initiatives being active at present in Europe. We first summarize the scientific and technological scope where CCs have been raised as a complex technology product and then we show that there exists still much room for performance improvement. The objectives and CC architectures being explored in the scope of the European project EUROTAPES are widely described and their potential in generating novel breakthroughs emphasized. The overall goal of this project is to create synergy among academic and industrial partners to go well beyond the state of the art in several scientific issues related to CCs' enhanced performances and to develop nanoengineered CCs with reduced costs, using high throughput manufacturing processes which incorporate quality control tools and so lead to higher yields. Three general application targets are considered which will require different conductor architectures and performances and so the strategy is to combine vacuum and chemical solution deposition approaches to achieve the targeted goals. A few examples of such approaches are described related to defining new conductor architectures and shapes, as well as vortex pinning enhancement through novel paths towards nanostructure generation. Particular emphasis is made on solution chemistry approaches. We also describe the efforts being made in transforming the CCs into assembled conductors and cables which achieve appealing mechanical and electromagnetic performances for power systems. Finally, we briefly mention some outstanding superconducting power application projects being active at present, in Europe and worldwide, to exemplify the strong advances in reaching the demands to integrate them in a new electrical engineering paradigm.

Chemical solution deposition (CSD) has recently emerged as a very competitive technique for obtaining epitaxial films of high quality with controlled nanostructure. In particular, the all-CSD approach is considered to be one of the most promising approaches for cost-effective production of second-generation superconducting wires. The trifluoroacetate (TFA) route is a very versatile route for achieving epitaxial YBa 2 Cu 3 O 7 (YBCO) layers with high critical currents. In this work, recent advances towards improvement of the performance of several conductor architectures based on the YBCO TFA process will be presented. We show that new improved anhydrous TFA precursors allow a significant shortening of the pyrolysis time (∼1.5 h), and we have increased the total film thickness in a single deposition using polymeric additives. On the other hand, further understanding of the YBCO nucleation and growth process has allowed us to obtain a controlled microstructure and high critical currents (J c ≈ 4-5 MA cm −2 and I c ≈ 300 A cm −1 width at 77 K). The growth conditions (CSD) and post-processing conditions (sputtering and CSD) for the underlying oxide cap and buffer layers (CeO 2 , BaZrO 3 , SrTiO 3 , La 2 Zr 2 O 7 , (La, Sr)MnO 3 ) and of self-organized nanostructures (CeO 2 , BaZrO 3 ) deposited by CSD have been investigated to obtain high-quality interfaces in multilayered systems. Different single-crystal or metallic substrates (YSZ-IBAD (yttrium stabilized zirconia-ion beam assisted deposition) and Ni-RABiT (rolling assisted biaxial texturing)) have been investigated and long (≈10 m) CSD biaxially textured buffers (CeO 2 , La 2 Zr 2 O 7 ) have been grown on Ni-RABiT substrates using a reel-to-reel system. High-performance TFA-YBCO-coated conductors have been obtained on vacuum-based buffer layers (I c ≈ 140 A cm −1 width) and on CSD buffer layers grown on IBAD YSZ-SS (stainless steel) substrates. Finally, we report on recent analysis of the magnetic granularity and vortex pinning properties of TFA-YBCO conductors.