Model scale tests of modern 'open rotor' propulsor concepts that have potential for significant fuel burn reduction for aircraft applications were completed at NASA Glenn Research Center. The recent test campaign was a collaboration between NASA, FAA, and General Electric (GE). GE was the primary industrial partner, but other organisations were involved such as Boeing and Airbus who provided additional hardware for fuselage simulations. The open rotor is a modern version of the UnDucted Fan (UDF ® ) that was flight tested in the late 1980s through a partnership between NASA and GE. The UDF ® was memorable for its scimitar shaped propeller blades and its unique noise signature. Design methods of the time were not able to optimise for both high aerodynamic efficiency and low noise simultaneously. Contemporary CFD/CAA based design methods can produce open rotor blade designs that maintain efficiency with acceptable acoustic signatures. Tests of two generations of new open rotor designs were conducted in the 9' × 15' Low Speed Wind Tunnel and the 8' × 6' Supersonic Wind Tunnel starting in late 2009 and completed in early 2012. Aerodynamic performance and acoustic data were obtained for take-off, approach and cruise conditions in isolated and semi-installed configurations. Additional detailed flow diagnostic measurements and acoustic

Building upon the successes of the UDF® program in the 1980’s, open rotor designs for high flight speed efficiency and low community noise have been developed at GE in collaboration with NASA and the FAA. Targeting a narrow body aircraft with 0.78 cruise Mach number, the cost-share program leveraged computational fluid dynamics (CFD), computational aero-acoustics (CAA), and rig scale testing to generate designs that achieved significant noise reductions well beyond what was attained in the 1980’s while substantially retaining cruise performance. This paper presents overall propeller net efficiency and acoustic assessments of GE’s modern open rotor designs based on measured rig data and the progression of the technology from the 1980’s through the present. Also discussed are the effects of aft rotor clipping, inter-rotor spacing, and disk loading. This paper shows how the two-phase design and scale model wind tunnel test program allowed for test results of the first design phase to feed back into the second design phase, resulting in 2–3% improvement in overall propeller net efficiency than the best efficiency design of the 1980’s while nominally achieving 15–17 EPNdB noise margin to Chapter 4 (when projected to full scale for a prescribed aircraft trajectory and installation). Accounting for trades and near term advancements, such a propulsion system is projected to meet the goal of 26% fuel burn reduction relative to CFM56-7B powered narrow body aircraft.

ments, the heat of formation of thorium dioxide, and an estimated uncertainty for the correction for the impurities. The value given here for ThC agrees with that of Aronson (1). This work agrees with Westrum's second law calculation for ThC193 (12). The thorium carbides are somewhat more stable than the corresponding uranium carbides [t\Hf 298.(UC100) = -23.2 ± 0.7 kcal. per mole; AHf 298=(UC1i93) = -20.5 kcal. per mole] (3). ACKNOWLEDGMENTThe authors appreciate the efforts of Patrick L. Stone for preparing the samples, Group CMB-1 and Helen Cowan for chemical analyses, Finley Ellinger, x-ray analysis, Charles Javorsky, metallography, and Daniel Pavone, for the glass-window bomb experiments.

No abstract

No abstract