No abstract

Inevitably, the 21st century has initiated a series of developments in the construction industry, leading to its digitalization and resulting in a series of innovative approaches and practices. At the same time, the construction industry, being one of the main global environment polluters, should fulfil well-established, as well as novel, sustainability requirements in order to evolve in harmony with the rising concerns on the availability of natural resources. This overview study aims to present the main developments, research, and scientific challenges in the field of sustainable construction, emphasizing the field of energy. The study aims to present a state-of-the-art scientific discussion on the sustainable built environment topic by analyzing cutting edge topics in the fields of building elements and whole building energy assessment, of indoor air quality and low carbon buildings, as well as on sustainable energy systems and smart buildings. The study also presents the state-of-the-art in existing tools which are adopted for the assessment of the sustainable built environment, including the use of digital tools and building information modelling for the energy assessment of the built environment, as well as the application of Life Cycle Assessment on building-related processes. Cross cutting issues related to the analysis of the building sector in the Industry 4.0 era, such as sustainability management topics and environmental geomatics are also discussed. The study concludes in those fields which will be of interest of the scientific community in the following years, towards achieving the goals of the sustainable development of the building sector.

Significant potential for reducing thermal energy consumption in buildings of moderate and cold climate countries lies within wind energy utilisation. Unlike solar irradiation, character of wind speeds in Central and Northern Europe correspond to the actual thermal energy demand in buildings. However, mechanical wind energy undergoes transformation into electrical energy before being actually used as thermal energy in most wind energy applications. The study presented in this paper deals with hydraulic systems, designed for small-scale applications to eliminate the intermediate energy transformation as it converts mechanical wind energy into heat directly. The prototype unit containing a pump, flow control valve, oil tank and piping was developed and tested under laboratory conditions. Results of the experiments showed that the prototype system is highly efficient and adjustable to a broad wind velocity range by modifying the definite hydraulic system resistance. Development of such small-scale replicable units has the potential to promote "bottom-up" solutions for the transition to a zero carbon society.

No abstract

Foam has an especially large inter-phase contact surface which allows using it as a coolant. Characteristics of one type of foam -statically stable foamdemonstrated its perfect availability for this purpose. Our previous investigations of heat transfer processes in statically stable foam flow showed that large heat transfer intensity may be reached at a small mass flow rate of the foam. Statically stable foam flow is the two-phase system that has number of peculiarities: drainage of liquid from foam, diffusive gas transfer and destruction of inter-bubble films. Those phenomena are closely linked with each other and make extremely complicated an application of analytic methods for the study of heat transfer in foam. Thus experimental method of investigation was selected in our work. Experimental investigation of the heat transfer process from the in-line tube bundle to the vertical statically stable foam flow was performed. Dependency of heat transfer intensity on flow parameters and on tube position in the bundle was determined. The results of the experimental investigation are presented in this paper.