Capillary zone electrophoresis (CZE) was used for separation of L-ascorbic acid (L-AA) and D-isoascorbic acid (D-IAA) in a model system. The effects of borate buffer concentration (0.05-0.25 M) and pH (pH 7.5-9.0) on migration time, resolution (Rs), and theoretical plates (N) were investigated. The migration times of L-AA and D-IAA increased with the increasing pH of carrier electrolyte (0.2 borate buffer), and the resolutions (Rs) of L-AA and D-IAA were calculated to be 12.98 at pH 9.0. Concentrations of borate buffer (pH 9.0) increased the Rs values of L-AA and D-IAA, and buffer concentrations >0.1 M were found to be effective for separation of L-AA and D-IAA. Methanol in the carrier electrolyte was also influential in improving the separation of L-AA and D-IAA, which increased with the increasing concentrations (0-10%) of methanol. The optimal separation conditions for L-AA and D-IAA were as follows: carrier electrolyte, 0.2 M borate buffer (pH 9.0); applied voltage, 25 kV, with an uncoated fused silica capillary, 75 microm (i.d.) x 57 cm.

A standard curve for the quantification of L-ascorbic acid (L-AA) by capillary zone electrophoresis (CZE) was established, and the quantification of ascorbic acid and total ascorbic acid in fruits (lemon, Sunkist, and pineapple) and spinach were performed using D-isoascorbic acid (D-IAA) as an internal standard. The minimum detection limits (MDLs) for L-AA and D-IAA were determined to be 1 and 2 microg/mL, respectively, at 265 nm. Dehydroascorbic acid (DHAA) in fruits and spinach was quantified in the presence of DL-homocysteine. The recoveries for L-AA in these juices were between 95 and 105%.