Solid state lithium conductors are attracting much attention for their potential applications to solid-state batteries and supercapacitors of high energy density to overcome safety issues and irreversible capacity loss of the currently commercialized ones. Recently, we discovered a new class of lithium super ionic conductors based on lithium borohydride (LiBH(4)). LiBH(4) was found to have conductivity as high as 10(-2) Scm(-1) accompanied by orthorhombic to hexagonal phase transition above 115 degrees C. Polarization to the lithium metal electrode was shown to be extremely low, providing a versatile anode interface for the battery application. However, the high transition temperature of the superionic phase has limited its applications. Here we show that a chemical modification of LiBH(4) can stabilize the superionic phase even below room temperature. By doping of lithium halides, high conductivity can be obtained at room temperature. Both XRD and NMR confirmed room-temperature stabilization of superionic phase for LiI-doped LiBH(4). The electrochemical measurements showed a great advantage of this material as an extremely lightweight lithium electrolyte for batteries of high energy density. This material will open alternative opportunities for the development of solid ionic conductors other than previously known lithium conductors.

No abstract

No abstract

A bulk layer of aluminum nitride (AlN) polycrystals was synthesized on a boron nitride crucible surface by heating Al chunks with 5 mol% of bismuth at 1273 K for 3 h under NH3 gas flow. The fragments of the layer were characterized by X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. The platelet grains of AlN with a size of 0.1–1.0 μm and having preferred orientation of the c‐axis perpendicular to the layer were formed at the crucible side. Nanotubes 6–15 μm long and about 20–100 nm thick grew on the gas phase side of the layer.

No abstract