High-strength bioactive glass-ceramic A-W was soaked in various acellular aqueous solutions different in ion concentrations and pH. After soaking for 7 and 30 days, surface structural changes of the glass-ceramic were investigated by means of Fourier transform infrared reflection spectroscopy, thin-film x-ray diffraction, and scanning electronmicroscopic observations, in comparison with in vivo surface structural changes. So-called Tris buffer solution, pure water buffered with trishydroxymethyl-aminomethane, which had been used by various workers as a "simulated body fluid," did not reproduce the in vivo surface structural changes, i.e., apatite formation on the surface. A solution, ion concentrations and pH of which are almost equal to those of the human blood plasma--i.e., Na+ 142.0, K+ 5.0, Mg2+ 1.5, Ca2+ 2.5, Cl- 148.8, HCO3- 4.2 and PO4(2-) 1.0 mM and buffered at pH 7.25 with the trishydroxymethyl-aminomethane--most precisely reproduced in vivo surface structure change. This shows that careful selection of simulated body fluid is required for in vitro experiments. The results also support the concept that the apatite phase on the surface of glass-ceramic A-W is formed by a chemical reaction of the glass-ceramic with the Ca2+, HPO4(2-), and OH- ions in the body fluid.

No abstract

Glass-ceramic A-W, containing crystalline apatite and wollastonite in a MgO-CaO-SiO2 glassy matrix shows high bioactivity as well as high mechanical strength, but other ceramics containing the same kinds of crystalline phases in different glassy matrices do not show the same bioactivity. In order to investigate the bone-bonding mechanism of this type of glass-ceramic, surface structural changes of the glass-ceramics after exposure to simulated body fluid were analyzed with various techniques. A solution with ion concentrations which are almost equal to those of the human blood plasma was used as the simulated body fluid, instead of Tris-buffer solution hitherto used. For analyzing the surface structural changes, thin-film x-ray diffraction was used in addition to conventional techniques. It was found that a bioactive glass-ceramic forms a Ca, P-rich layer on its surface in the fluid but nonbioactive ones do not, and that the Ca, P-rich layer consists of carbonate-containing hydroxyapatite of small crystallites and/or defective structure. These findings were common to those of Bioglass-type glasses. So, we conclude that the essential condition for glass and glass-ceramic to bond to bone is the formation of the surface apatite layer in the body environment but it is not essential to contain apatite within the material. Bioactivity of glass and glass-ceramic can be evaluated in vitro by examining the formation of the surface apatite layer in the simulated body fluid described above.

No abstract

It has been confirmed that the essential condition for glasses and glass-ceramics to bond to living bone is the formation of an apatite layer on their surfaces in the body. It has been proposed that a hydrated silica formed on the surfaces of these materials in the body plays an important role in forming the surface apatite layer, but this has not yet been proved. In the present study, it is shown experimentally that a pure hydrated silica gel can induce apatite formation on its surface in a simulated body fluid when its starting pH is increased from 7.2 to 7.4.