Wheat straw was subjected to autohydrolysis treatments in order to selectively hydrolyze the hemicellulose fraction. The effects of temperature (150-240 degrees C) and non-isothermal reaction time on the composition of both liquid and solid phases were evaluated and interpreted using the severity factor (log R0). The operational conditions leading to the maximum recovery of hemicellulose-derived sugars were established for log R0 = 3.96 and correspond to 64% of the original (arabino)xylan with 80% of sugars as xylooligosaccharides. Under these conditions, a solubilization of 58% xylan, 83% arabinan, and 98% acetyl groups occurred. Glucan was mainly retained in the solid phase (maximum solubilization 16%), which enables an enrichment of the solid phase to contain up to 61% glucan. Delignification was not extensive, being utmost 15%. The yields of soluble products, including sugars, acetic acid, and degradation compounds, such as, furfural, 5-hydroxymethylfurfural furfural obtained suggest the fitness of liquid stream for fermentation purposes or to obtain xylooligosaccharides with potential applications in food, pharmaceutical, and cosmetic industries.

h i g h l i g h t s Autohydrolysis was an efficient pretreatment for mixtures of lignocellulosic materials. Autohydrolysis profile is similar for different feedstock mixtures. Sugar-based biorefineries can use mixtures of hardwoods and agricultural residues. Feedstock mixtures potentially mitigate biomass supply constrains in biorefineries.

The dilute acid posthydrolysis of wheat straw hemicellulosic oligosaccharides obtained by autohydrolysis was evaluated. An empirical model was used to describe the effect of catalyst concentration (sulfuric acid, 0.1-4% w/w) and reaction time (0-60 min) based on data from a Doehlert experimental design. Catalyst concentration is the main variable influencing posthydrolysis performance, as both its linear and quadratic coefficients are statistically significant for the majority of the studied variables, namely, the ones related to sugar and byproducts production. Reaction time influences xylose and furan derivatives concentrations but not phenolics or acetic acid content. Catalyst concentration and reaction time interact synergistically, minimizing sugar recovery and promoting furan derivatives production. Based on the proposed models, it was possible to delimit an operational range that enables to obtain high monosaccharides recovery together with a slight decrease in inhibitors content as compared to the standard acid hydrolysis treatment. Furthermore, this is achieved with up to 70% less acid spending or considerable savings on reaction time.

h i g h l i g h t sER, WS and OP are suitable feedstocks for Southern European biorefineries. The proposed biorefining strategy is efficient for monosaccharide recovery. Maximal monosaccharide recovery was obtained after autohydrolysis at 210°C. Maximal cellulose enzymatic digestibility was obtained after autohydrolysis at 230°C. The conditions for maximal sugar recovery yield were similar for all feedstocks. This work proposes the biorefining of eucalyptus residues (ER), wheat straw (WS) and olive tree pruning (OP) combining hydrothermal pretreatment (autohydrolysis) with acid post-hydrolysis of the liquid fraction and enzymatic hydrolysis of the solid fraction towards maximal recovery of monosaccharides from those lignocellulose materials. Autohydrolysis of ER, WS and OP was performed under non-isothermal conditions (195-230°C) and the non-cellulosic saccharides were recovered in the liquid fraction while cellulose and lignin remained in the solid fraction. The acid post-hydrolysis of the soluble oligosaccharides was studied by optimizing sulfuric acid concentration (1-4% w/w) and reaction time (10-60 min), employing a factorial (2 2 ) experimental design. The solids resulting from pretreatment were submitted to enzymatic hydrolysis by applying commercial cellulolytic enzymes Celluclast Ò 1.5 L and Novozyme Ò 188 (0.225 and 0.025 g/g solid, respectively). This strategy provides high total monosaccharide recovery or high glucose recovery from lignocellulosic materials, depending on the autohydrolysis conditions applied.