A real-scale application experience Natural Treatment Systems for Wastewater (NTSW) operating in continues with livestock farms for one year. These systems are based on digesters, subsurface vertical flow constructed wetlands (SVFCW) and facultative ponds. Chemical Oxygen Demand removal efficiency (CODRE) has obtained between 70 and 90%. Likewise, it have been possible to compare the operation of cascade flow digesters (CFD) (<76% CODRE) versus complete mixing digesters (CMD) (<50% CODRE). Facultative ponds (FP) when combined with (SSFCW), removed a higher percentage of CODRE compared with ponds (92%). Correlations of interest have been found between the variables evaluated in each plant. Finally, different elements are alternated in the same system, this system is capable of supporting variations in changes in flow rate and organic load coming from the farm, maintaining an adequate elimination of COD and other parameters of interest.

This work proposes a series of strategies and tools for the design and characterization of natural treatment systems of wastewater (NTSW) applied in livestock farms, considering the parameters of flow rate (Q), conductivity (EC) and chemical oxygen demand (COD) of the waste generated, farm location, hydraulic retention time (HRT), and removal/reduction rate targets. The high organic load of the effluent generated in these farms has an important environmental impact, which is amplified in insular or isolated territories. The application of such treatment systems has demonstrated their suitability in these environments, but their design lacks proper characterization and sizing tools for their adequate operation. The proposed tools in this work are based on a collection of experimental data over a ten-year period of application of NTSW in real farms. This work contributes to facilitate the design and implementation of NTSW in farms located in isolated, island, or similar-size environments. Finally, as a practical application, an inventory and implementation of the tool developed for livestock farms on the island of Gran Canaria (Spain) is carried out.

This work presents an original 3D code in FreeFem++ to recreate the behavior of anaerobic microorganisms in non-stirred anaerobic reactors with an intermittent feed. The physical and biochemical phenomena have been considered using a mathematical model based on a set of partial differential equations: Stokes, advection–diffusion, and diffusion–reaction. The description of the anaerobic metabolism was carried out by implementing the structured AMD1 model. The Galerkin finite element method has been used to solve the partial differential equations defined in the model. Finally, the methodology and procedures are presented by means of a concrete example. Thanks to the inclusion of this e-learning tool for use in virtual laboratories, it is possible to improve the understanding of engineering students on the functioning of the metabolism that takes place inside non-stirred anaerobic reactors that are fed discontinuously. This proposal reinforces to students, in a transversal way, both environmental sensitivity and awareness of the circular economy focused on the implementation of natural wastewater treatment systems in rural areas.