No abstract

Access and use of this website and the material on it are subject to the Terms and Conditions set forth at Enhanced terahertz transmission through bullseye plasmonics lenses fabricated using micromilling techniques Heggie, Tanner J.; Naylor, David A.; Gom, Brad G.; Bordatchev, Evgueni; Trimboli, M. Grace http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/jsp/nparc_cp.jsp?lang=fr L'accès à ce site Web et l'utilisation de son contenu sont assujettis aux conditions présentées dans le site LISEZ CES CONDITIONS ATTENTIVEMENT AVANT D'UTILISER CE SITE WEB. NRC Publications Record / Notice d'Archives des publications de CNRC:http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/ctrl?action=rtdoc&an=21277263&lang=en http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/ctrl?action=rtdoc&an=21277263&lang=fr READ THESE TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS WEBSITE.http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/jsp/nparc_cp.jsp?lang=en Vous avez des questions? Nous pouvons vous aider. Pour communiquer directement avec un auteur, consultez la première page de la revue dans laquelle son article a été publié afin de trouver ses coordonnées. Si vous n'arrivez pas à les repérer, communiquez avec nous à PublicationsArchive-ArchivesPublications@nrc-cnrc.gc.ca. Questions? Contact the NRC Publications Archive team atPublicationsArchive-ArchivesPublications@nrc-cnrc.gc.ca. If you wish to email the authors directly, please see the first page of the publication for their contact information. NRC Publications Archive Archives des publications du CNRCThis publication could be one of several versions: author's original, accepted manuscript or the publisher's version. / La version de cette publication peut être l'une des suivantes : la version prépublication de l'auteur, la version acceptée du manuscrit ou la version de l'éditeur. For the publisher's version, please access the DOI link below./ Pour consulter la version de l'éditeur, utilisez le lien DOI ci-dessous.http://doi.org/10.1007/s11468-015-0152-7 Abstract Imaging applications at terahertz frequencies are, in general, limited to relatively low spatial resolution due to the effects of diffraction. By using a subwavelength aperture in the near-field, however, it is possible to achieve subwavelength resolution, although low transmission through the aperture limits the sensitivity of this approach. Plasmonic lenses in the form of bullseye structures, which consist of a circular subwavelength aperture surrounded by concentric periodic corrugations, have demonstrated enhanced transmission, thereby increasing the utility of near-field imaging configurations. In this paper, the design, fabrication, and experimental performance of plasmonic lenses optimized for 300 GHz are discussed. While nanofabrication techniques are required for optical applications, microfabrication techniques are sufficient for terahertz applications. The process flow for fabricating a double-sided bullseye structure using a precision micromilling technique is described. Transmission and beam profile measurements using a customized t...

A major limitation in terahertz (THz) imaging applications is the relatively poor diffraction limited spatial resolution. A common approach to achieve subwavelength resolution is near-field imaging using a subwavelength aperture, but the low transmission efficiency through the aperture limits the sensitivity of this method. Bullseye structures, consisting of a single subwavelength circular aperture surrounded by concentric periodic corrugations, have been shown to enhance transmission through subwavelength apertures. At optical wavelengths, the fabrication of bullseye structures has been traditionally achieved by lithographic or chemical processes. Since the scale of plasmonic structures depends on the incident wavelength, precision micromilling techniques are well suited for THz applications. In this paper we describe a diamond micromilling process for the fabrication a plasmonic lenses operating at 325 GHz. Theoretical simulations are obtained using an FDTD solver and the performance of the lens is measured using a customized THz test bed.

No abstract