Electronic and photonic fiber devices that can sustain large elastic deformation are becoming key components in a variety of fields ranging from healthcare to robotics and wearable devices. The fabrication of highly elastic and functional fibers remains however challenging, which is limiting their technological developments. Simple and scalable fiber-processing techniques to continuously codraw different materials within a polymeric structure constitute an ideal platform to realize functional fibers and devices. Despite decades of research however, elastomeric materials with the proper rheological attributes for multimaterial fiber processing cannot be identified. Here, the thermal drawing of hundreds-of-meters long multimaterial optical and electronic fibers and devices that can sustain up to 500% elastic deformation is demonstrated. From a rheological and microstructure analysis, thermoplastic elastomers that can be thermally drawn at high viscosities (above 10 Pa s), allowing the encapsulation of a variety of microstructured, soft, and rigid materials are identified. Using this scalable approach, fiber devices combining high performance, extreme elasticity, and unprecedented functionalities, allowing novel applications in smart textiles, robotics, or medical implants, are demonstrated.

Fibers that harvest mechanical energy via the triboelectric effect are excellent candidates as power sources for wearable electronics and functional textiles. Thus far however, their fabrication remains complex, and exhibited performances are below the state-of-the-art of 2D planar configurations, making them impractical. Here, we demonstrate the scalable fabrication of micro-structured stretchable triboelectric fibers with efficiencies on par with planar systems. We use the thermal drawing process to fabricate advanced elastomer fibers that combine a micro-textured surface with the integration of several liquid metal electrodes. Such fibers exhibit high electrical outputs regardless of repeated large deformations, and can sustain strains up to 560%. They can also be woven into deformable machine-washable textiles with high electrical outputs up to 490 V, 175 nC. In addition to energy harvesting, we demonstrate self-powered breathing monitoring and gesture sensing capabilities, making this triboelectric fiber platform an exciting avenue for multi-functional wearable systems and smart textiles.

imaging systems, [3][4][5][6][7] nanophotonics, [8] light generation and communication, [1] energy harvesting, [9][10][11] and advanced textiles. [12,13] To functionalize optical fibers, a first strategy relies on wafer-based techniques [8] and modified deposition [14,15] to integrate functional materials at the tip or within a few tens of centimeters of microstructured silica fibers. An alternative approach exploits the well-established thermal drawing of macroscopic preforms that integrate the desired multimaterial architecture. [1] This has the advantage of simplicity and scalability, since the fiber pulling step results in tens of kilometers of fibers that have the same crosssectional structure as the initial preform. Thus far however, realizing high-quality semiconducting materials that can act as high-performance photodetectors using the thermal drawing process remains a challenge. A recent strategy consists in the thermal drawing within silica fibers of high melting point materials such as silicon, [16] germanium, [17] or various compounds. [18] The melting and solidification during drawing result however in semiconductors with a highly polycrystalline microstructure, requiring local postdrawing annealing or laserbased steps to engineer a desired microstructure. [15,18,19] It is also difficult to integrate electrodes in contact with the semiconducting domains and despite an ingenious and promising method, no device with good optoelectronic properties has been shown. [17] The alternative strategy relies on exploiting the polymer fiber platform. It has several advantages compared to its silica counterpart, including low-temperature processing, robust mechanical properties, simple integration of electrodes, and the ability to impart fibers with complex architectures and multiple functionalities. [1] Thus far however, the postdrawing crystallization schemes applied to semiconducting chalcogenide glasses have resulted in poor control over the phase, grain size, and orientation, impairing device performance. [5,20] A powerful approach to control the microstructure and enhance optoelectronic performance is via the growth of welloriented semiconducting nanowires. This approach has not been exploited in the frame of fiber-integrated devices since conventional fabrication procedures of semiconducting nanowires are complex and only adapted to specific substrates seemingly incompatible with the thermal drawing process and the fiber materials and geometry. [8,21] Here, we demonstrate for the first time the robust and scalable integration of high-qualityThe recent ability to integrate semiconductor-based optoelectronic functionalities within thin fibers is opening intriguing opportunities for flexible electronics and advanced textiles. The scalable integration of high-quality semiconducting devices within functional fibers however remains a challenge. It is difficult with current strategies to combine high light absorption, good microstructure and efficient electrical contact. The growth of semiconducting nanowires is ...

No abstract

The controlled texturing of surfaces at the micro‐ and nanoscales is a powerful method for tailoring how materials interact with liquids, electromagnetic waves, or biological tissues. The increasing scientific and technological interest in advanced fibers and fabrics has triggered a strong motivation for leveraging the use of textures on fiber surfaces. Thus far however, fiber‐processing techniques have exhibited an inherent limitation due to the smoothing out of surface textures by polymer reflow, restricting achievable feature sizes. In this article, a theoretical framework is established from which a strategy is developed to reduce the surface tension of the textured polymer, thus drastically slowing down thermal reflow. With this approach the fabrication of potentially kilometers‐long polymer fibers with controlled hierarchical surface textures of unprecedented complexity and with feature sizes down to a few hundreds of nanometers is demonstrated, two orders of magnitude below current configurations. Using such fibers as molds, 3D microchannels are also fabricated with textured inner surfaces within soft polymers such as poly(dimethylsiloxane), at dimensions and a degree of simplicity impossible to reach with current techniques. This strategy for the texturing of high curvature surfaces opens novel opportunities in bioengineering, regenerative scaffolds, microfluidics, and smart textiles.