In this article, a low-cost 16-port non-planar Multiple-Input-Multiple Output (MIMO) antenna system is proposed for future 5G applications. The non-planar MIMO antenna system is established around a 3D-octagonal-shape polystyrene block. The MIMO elements are arranged on the eight-sides of octagonalshape block, whereas bottom and top faces of polystyrene block are left void. The single antenna element comprises of slotted microstrip patch with a stepped chamfered feed line and defected ground plane. Each MIMO element is designed on FR-4 substrate with a size of 22 mm × 20 mm, to cover the frequency band of 3.35 GHz to 3.65 GHz for the fifth-generation (5G) applications. The isolation between array elements is improved by using a meander-lines based near-zero-index epsilon-negative (NZI-ENG) metamaterial decoupling structure. The array elements are placed on the top-layer, whereas common connected ground plane and decoupling structure is placed on the bottom-layer. The metamaterial-based decoupling structure offers an isolation of more than 28 dB for antenna elements arranged in across and side-by-side configuration. Moreover, simulated and measured MIMO performance parameters i.e. Total Active Reflection Coefficient (TARC) < −18 dB, Envelop correlation coefficient (ECC) < 0.1 and Channel capacity loss (CCL) < 0.3 are in acceptable limits. The proposed non-planar 3D-MIMO antenna system can be employed for indoor localization systems and wireless personal area network applications, where different 5G devices are wirelessly linked to a centralized server. Moreover, a good agreement between simulated and measured results is achieved for the non-planar MIMO antenna system. INDEX TERMS Antenna, channel capacity loss (CCL), common ground plane, envelope correlation coefficient (ECC), fifth-generation (5G), epsilon negative metamaterial (ENG-MTM), multiple-input-multipleoutput (MIMO).

A single-layered multiple-input multiple-output (MIMO) antenna working at 28 GHz loaded with a compact planar-patterned metamaterial (MTM) structures is presented in this paper for millimeterwave application. A combination of a split square and hexagonal shaped unit cell is designed and investigated with a wide range of effective near-zero index (NZI) of permeability and permittivity, along with a refractive index (NZRI) property. The metamaterial characteristics were examined through the material wave propagation in two main directions at y and x-axis. For wave propagation at the y-axis, it demonstrates munear-zero (MNZ) with more than 6 GHz bandwidth, near-zero refractive index (NZRI), and epsilon-near-zero (ENZ) properties. However, it indicates a wide negative range of single mu metamaterial (MNG) from 27.6 to 28.9 GHz frequency span at x-axis wave propagation. A single antenna with 3×3 metamaterial unit cells is proposed to operate at a frequency band (24 -30) GHz. Furthermore, MIMO antenna with only 4 mm space between antenna elements provides high isolation of more than 24 dB. The measured results show that the MIMO antenna is satisfied with 6 GHZ bandwidth, and maximum peak gain of 12.4 dBi. In addition to that, the proposed MIMO antenna loaded with MTM has also shown good performances with high diversity gain (DG > 9.99), envelope correlation coefficient (ECC) lower than 0.0013, channel capacity loss (CCL) < 0.42, total active reflection coefficient (TARC) < −7 dB, total efficiencies of higher than 98%, with an overall antenna size of 52 mm × 23 mm. INDEX TERMSMillimeter-wave (mm-wave), antenna array, metamaterial (MTM), high isolation, nearzero index (NZI) metamaterial, envelope correlation coefficient, high gain

In this article, an eight-element ultra-wideband (UWB) Multiple-Input-Multiple Output (MIMO) antenna system is proposed for 3D non-planar applications. The proposed UWB-MIMO antenna is installed around a polystyrene block in the 3D-octagonal arrangement. The eight radiating elements are placed on the sides of the octagonal polystyrene block with top and bottom surfaces left open. The single antenna element consists of a modified Y-shaped radiating patch, epsilon-negative (ENG) metamaterial, and a partial ground plane. A modified pie-shaped decoupling structure is deployed at the backside of the radiating patch to improve the isolation among array elements. Each antenna element is printed on a low-cost FR-4 substrate with dimensions of 28 mm × 23 mm with coverage of the whole UWB spectrum from 3.1 to 10.6 GHz frequency band. The eight-port UWB-MIMO antenna system consists of symmetric and nonsymmetric array configurations. Simulated and measured MIMO performance parameters i.e. Channel Capacity Loss (CCL) < 0.35, Envelope Correlation Coefficient (ECC) < 0.0025 and Total Active Reflection Coefficient (TARC) <-11 dB are in acceptable limits for both symmetric and non-symmetric configurations. The proposed MIMO antenna system is suitable for 3D system-in-package, indoor localization systems, and wireless personal area network applications in industries where multiple machines are connected to a central server wirelessly through such kinds of antennas in a rich scattering environment.