Recent years have witnessed an increasing interest in highly-efficient absorbers of visible light for the conversion of solar energy into electrochemical energy. This study presents a TiO2-Au bilayer that consists of a rough Au film under a TiO2 film, which aims to enhance the photocurrent of TiO2 over the whole visible region and may be the first attempt to use rough Au films to sensitize TiO2. Experiments show that the bilayer structure gives the optimal optical and photoelectrochemical performance when the TiO2 layer is 30 nm thick and the Au film is 100 nm, measuring the absorption 80–90% over 400–800 nm and the photocurrent intensity of 15 μA·cm−2, much better than those of the TiO2-AuNP hybrid (i.e., Au nanoparticle covered by the TiO2 film) and the bare TiO2 film. The superior properties of the TiO2-Au bilayer can be attributed to the rough Au film as the plasmonic visible-light sensitizer and the photoactive TiO2 film as the electron accepter. As the Au film is fully covered by the TiO2 film, the TiO2-Au bilayer avoids the photocorrosion and leakage of Au materials and is expected to be stable for long-term operation, making it an excellent photoelectrode for the conversion of solar energy into electrochemical energy in the applications of water splitting, photocatalysis and photosynthesis.

We report a one-step strategy for the formation of an artificial photosystem I, with an enhanced coenzyme regeneration rate.

Far-infrared radiation (FIR) possesses various promising properties that are beneficial to an individuals’ health. Exploring the interaction between fiber shapes and FIR performance is thought to be a significant means to develop highly-efficient FIR textile products. In this study, a non-additive triangular polyamide (PA) fiber showed excellent FIR properties in both theoretical simulation and experimental verification aspects. The triangular PA fiber affords a higher probability to facilitate large optical path difference, improving both FIR absorption and emission. Textiles woven with the specific triangular PA fiber achieved a remarkable emissivity of 91.85% and temperature difference of 2.11 Celsius, which is obviously superior to the reference circular fiber (86.72%, 1.52 Celsius). Considering the low cost, environmental stability, facile fabrication, as well as being environmentally friendly, this non-additive triangular PA fiber has great potential for high-performance and cost-effective FIR textiles in the future.

Artificial photosynthesis (APS) mimics natural photosynthesis (NPS) to store solar energy in chemical compounds for applications such as water splitting, CO2 fixation and coenzyme regeneration. NPS is naturally an optofluidic system since the cells (typical size 10 to 100 µm) of green plants, algae, and cyanobacteria enable light capture, biochemical and enzymatic reactions and the related material transport in a microscale, aqueous environment. The long history of evolution has equipped NPS with the remarkable merits of a large surface-area-to-volume ratio, fast small molecule diffusion and precise control of mass transfer. APS is expected to share many of the same advantages of NPS and could even provide more functionality if optofluidic technology is introduced. Recently, many studies have reported on optofluidic APS systems, but there is still a lack of an in-depth review. This article will start with a brief introduction of the physical mechanisms and will then review recent progresses in water splitting, CO2 fixation and coenzyme regeneration in optofluidic APS systems, followed by discussions on pending problems for real applications.