No abstract

No abstract

Resistance spot welding was used to joint AISI 316L austenitic stainless steel and AISI 1020 low carbon steel. During the welding process, temperature measurements were taken to obtain the temperature curves. Because of the different chemical compositions of the carbon steel and stainless steels, their thermal conductivity values are also different. Electrical resistivity is also an important parameter when carbon steel is spot welded to stainless steel. Differences in the thermal conductivity and in the electrical resistivity of metals lead to an asymmetrical weld nugget in the dissimilar joints. Dissimilar resistance spot welding can be more complex than similar welding due to different thermal cycle experienced with each metal.

The heat transfer coefficient (h) is an extremely important variable in the evaluation of convective heat transfer, however, its determination is a great challenge due to the various factors that influence it: fluid viscosity, fluid density, specific heat of the fluid, thermal conductivity of the fluid, coefficient of volumetric expansion, fluid velocity. The objective of this work is the experimental determination of the convective heat transfer coefficient by means of the global capacitance method. Three test bodies, two cylindrical bodies and one spherical body were used. These specimens were individually heated in a stove, and heating was monitored by means of a thermocouple and a data logger. The results showed a good concordance between the values of h obtained experimentally and the literature.

No abstract