Copper is a major problem in industrial wastewater streams, seriously affecting the quality of potential drinking water. Several approaches, including continuous membrane processes or batch-wise application of adsorbents, are in use to tackle this problem. Unfortunately, these processes suffer from their particular drawbacks, such as low permeance or disposal of saturated adsorbents. However, a combination of these processes could constitute a step towards a more efficient copper removal solution. Here, we present a nanopaper ion-exchanger prepared from cellulose nanofibrils produced from fibre sludge, a paper industry waste stream, for the efficient, continuous removal of copper from aqueous solutions. This nanopaper ion-exchanger comprises phosphorylated cellulose nanofibrils that were processed into nanopapers by papermaking. The performance of these phosphorylated nanopaper membranes was determined with respect to their rejection of copper and permeance. It was shown that this new type of nanopaper is capable of rejecting copper ions during a filtration process by adsorption. Results suggest that functional groups on the surface of the nanopapers contribute to the adsorption of copper ions to a greater extent than phosphate groups within the bulk of the nanopaper. Moreover, we demonstrated that those nanopaper ion-exchangers could be regenerated and reused and that in the presence of calcium ions, the adsorption capacity for copper was only slightly reduced.

No abstract

The TiO2/CNNS composite shows enhanced sensitivity to atmospheric water (i.e., varied impedance with exposure to air during the measurement) compared to CNNS.

In this work, g-C3N4/TiO2 composites were fabricated through a hydrothermal method for the efficient photocatalytic degradation of imidacloprid (IMI) pesticide. The composites were fabricated at varying loading of sonochemically exfoliated g-C3N4 (denoted as CNS). Complementary characterization results indicate that the heterojunction between the CNS and TiO2 formed. Among the composites, the 0.5CNS/TiO2 material gave the highest photocatalytic activity (93% IMI removal efficiency) under UV-Vis light irradiation, which was 2.2 times over the pristine g-C3N4. The high photocatalytic activity of the g-C3N4/TiO2 composites could be ascribed to the band gap energy reduction and suppression of photo-induced charge carrier recombination on both TiO2 and CNS surfaces. In addition, it was found that the active species involved in the photodegradation process are OH and holes, and a possible mechanism was proposed. The g-C3N4/TiO2 photocatalysts exhibited stable photocatalytic performance after regeneration, which shows that g-C3N4/TiO2 is a promising material for the photodegradation of imidacloprid pesticide in wastewater.