No abstract

The influence of operational, parameters, such as hydraulic retention time, organic loading rate, influent substrate concentration, pH, and temperature, on the performance of the first phase of anaerobic digestion has been investigated. A complex substrate based on beef extract was used, and six series of experimental runs were conducted, each one showing the effect of one operational variable. The predominant fermentation products were always acetic and propionic acid, independent of the values of the operational parameters. For initial COD concentrations and hydraulic retention times above the critical values identified as 3 g/L and 6 h, respectively, the degree of acidification achieved was between 30 and 60%. The degree of acidification was found to increase with the hydraulic retention time and decrease with the influent substrate concentration and organic loading rate, while the opposite held true for the rate of product formation. Furthermore, it has been demonstrated that acidification is primarily determined by the hydraulic retention time and the rate of product formation by the influent substrate concentration. The concentration of the acetic acid produced was found to depend on the operational parameters. However, the concentration of propionic acid produced depended only on the substrate availability with a consistent proportion of 8% initial COD converted to it. The optimum pH and temperature were 7 and 40 degrees C, respectively. The percentage of acetic acid as a proportion of the total volatile fatty acids produced was found to increase with increasing pH and temperature, while the percentage of propionic acid seemed to decrease accordingly. Finally the effect of the temperature on the rate of acidification followed an Arrhenius type equation with an activation energy equal to 4739 cal/mol.

No abstract

No abstract

No abstract