Despite numerous advantages, applications of conventional microporous metal–organic frameworks (MOFs) are hampered by their limited pore sizes, such as in heterogeneous catalysis and guest delivery, which usually involve large molecules. Construction of hierarchically porous MOFs (HP-MOFs) is vital to achieve the controllable augmentation of MOF pore size to mesopores or even macropores, which can enhance the diffusion kinetics of guests and improve the storage capacity. This review article focuses on recent advances in the methodology of HP-MOF synthesis, covering preparation of HP-MOFs with intrinsic hierarchical pores, and modulated, templated and template-free synthetic strategies for HP-MOFs. The key factors which affect the formation of HP-MOF architectures are summarized and discussed, followed by a brief review of their applications in heterogeneous catalysis and guest encapsulation. Overall, this review presents a roadmap that will guide the future design and development of HP-MOF materials with molecular precision and mesoscopic complexity.

Effective aromatization processes for converting light hydrocarbons to BTX aromatics could improve the availability of aromatics as chemicals and high octane gasoline-blending components. To this end, M2 forming offers a potential new route. The process can convert olefins and paraffins to aromatics. The aromatic yields are only limited by the stoichiometric constraint imposed by the hydrogen content of the feed and the products. The heart of this process is the HZSM-5-type catalyst. The process operates in the cyclic mode at about 538 °C and 1-20 atm. The reactions involved in the M2 forming process are complex, consecutive, acid-catalyzed reactions, including (1) conversion of olefinic and paraffinic molecules to small olefins via acidic cracking and hydrogen-transfer reactions,(2) formation of C2-C10 olefins via transmutation, oligomerization, cracking, and Isomerization reactions, and (3) aromatic formation via cyclization and hydrogen transfer.

The idea of modularity in organic total synthesis has promoted the construction of diverse targeted natural products by varying the building blocks and assembly sequences. Yet its utilization has been mainly limited to the synthesis of molecular compounds based on covalent bonds. In this work, we expand the conceptual scope of modular synthesis into framework materials, which bridges metal-and covalent organic frameworks (MOFs and COFs) hierarchically in reticular chemistry. While the assembly sequences are determined by the coordination or the covalent bond strengths, a modular synthesis strategy which progressively links simple building blocks into increasingly sophisticated superstructures was reported. As a result, a series of hierarchical COF-on-MOF structures with architectural intricacy were obtained through sequence-defined reactions of diverse building blocks. The tunability of spatial apportionment, compositions, and functionality was successfully managed in these framework materials. To the best of our knowledge, this is the first report on the synthesis of COF@MOF composites and also the first discovery of controlled COF alignment. This generalizable modularity strategy will not only accelerate the discovery of multicomponent framework materials by the hierarchical assembly of MOFs and COFs but also offer a predictable retrosynthetic route to smart materials with unusual tunability owing to the diverse inorganic or organic building units.

The high porosity and tunability of metal–organic frameworks (MOFs) have made them an appealing group of materials for environmental applications. However, their potential in the photocatalytic degradation of per- and polyfluoroalkyl substances (PFAS) has been rarely investigated. Hereby, we demonstrate that over 98.9% of perfluorooctanoic acid (PFOA) was degraded by MIL-125-NH2, a titanium-based MOF, in 24 h under Hg-lamp irradiation. The MOF maintained its structural integrity and porosity after three cycles, as indicated by its crystal structure, surface area, and pore size distribution. Based on the experimental results and density functional theory (DFT) calculations, a detailed reaction mechanism of the chain-shortening and H/F exchange pathways in hydrated electron (eaq – )-induced PFOA degradation were revealed. Significantly, we proposed that the coordinated contribution of eaq – and hydroxyl radical (•OH) is vital for chain-shortening, highlighting the importance of an integrated system capable of both reduction and oxidation for efficient PFAS degradation in water. Our results shed light on the development of effective and sustainable technologies for PFAS breakdown in the environment.

Hierarchically porous metal–organic frameworks (HP‐MOFs) facilitate mass transfer due to mesoporosity while preserving the advantage of microporosity. This unique feature endows HP‐MOFs with remarkable application potential in multiple fields. Recently, new methods such as linker labilization for the construction of HP‐MOFs have emerged. To further enrich the synthetic toolkit of MOFs, we report a controlled photolytic removal of linkers to create mesopores within microporous MOFs at tens of milliseconds. Ultraviolet (UV) laser has been applied to eliminate “photolabile” linkers without affecting the overall crystallinity and integrity of the original framework. Presumably, the creation of mesopores can be attributed to the missing‐cluster defects, which can be tuned through varying the time of laser exposure and ratio of photolabile/robust linkers. Upon laser exposure, MOF crystals shrank while metal oxide nanoparticles formed giving rise to the HP‐MOFs. In addition, photolysis can also be utilized for the fabrication of complicated patterns with high precision, paving the way towards MOF lithography, which has enormous potential in sensing and catalysis.