For study the damage characteristic of the mullite heat storage ceramic under thermal shock condition, mechanical properties of mullite have been investigated. Under the different cooling mediums (room temperature water, boiling water, air), single and five cycles thermal shock conditions, The article studied the variation of flexural strength and fracture toughness along with temperature. The result show that with the increase of heat transfer coefficient of cooling medium, the bending strength of ceramic decreased. In the 600°C,the ceramic have a maximum bending strength and a minimum fracture toughness. The fracture toughness of precrack specimen is lower than that of non-precrack specimen on the whole. Both Precrack ceramic and non-precrack ceramic have a maximum fracture toughness at 400°C. The study of this paper provides a theoretical basis for the better predicting fracture damage and service life of heat storage ceramic.

Mullite material is a material commonly used in honeycomb regenerator, because in the process of using material under big temperature difference effect, so have a great demand for its thermal shock resistance. The used mullite ceramics were made by the direct solid phase sintering method, and the modulus of elasticity of the mullite ceramics measured by ultrasonic pulse-echo method in a thermal shock and thermal fatigue experiment, respectively. In the air-cooling condition, the study found the mullite ceramic without thermal shock that the longitudinal wave velocity and shear wave velocity respectively 3970(m/s) and 2492(m/s). After 45 times thermal shock of temperature difference of 800°C, longitudinal wave velocity and shear wave velocity decreased to 3910(m/s) and 2457(m/s), and the value of the modulus of elasticity changed 1020MPa. By observing the change of the elastic modulus value rule, can know the elastic deformation of thermal shock on the material performance of thermal shock damage. Moreover, the results can provide the data basis for the calculation of the residual strength and the numerical simulation of thermal stress.

In order to develop flexible absorption fabric and study the effects of specifications on absorption properties, two-layer laminated fabrics were designed according to thickness matching and impedance matching. Stainless steel core-spun yarn fabrics were used as first layer which easily realized matching to the free space, Ni-Fe fiber consisted of second layer because its strong dielectric loss and magnetic loss. The reflectivity of fabrics were measured by the means of "arch testing method" in the range from 2~18 GHz. The results showed that the reflectivities of laminated fabrics can below-20 dB and the bandwidth <-10dB can reach 3.88 GHz with the change of fabric specifications.

Thermal flow-reversal oxidation is the main technology that can effectively reduce emissions of ventilation air methane. As the core component of coal mine ventilation oxidation devices, honeycomb ceramic oxidation beds play a decisive role in the functionality of these devices. The thermal fatigue properties of mullite ceramic-which is commonly used in oxidation beds-was tested in the present research. Then, the service life of the oxidation bed was predicted according to the intensity attenuation law and the thermal fatigue experimental data. The results of the fatigue experiment indicated that in general, the bending strength of mullite ceramics decreases as thermal shocks increase. At higher temperature differences, the bending strength decreased at greater rates. At the temperature differences between 600 and 800°C, the bending strength initially declined. Then, after reaching a certain value, it remained unchanged for a while before declining again. The results of the equation that was developed from intensity attenuation theory and the thermal fatigue experimental data indicate that the thermal fatigue life of an oxidation bed is about 1-8 months. The predicted result is consistent with actual working conditions.