A nanometer (10-9m) structured particle material, generally so defined that the diameter of the particle is no more than 100nm, has some special physical efficacy in its surface, small size and other properties. One kind of polysilicon with sizes ranging from 10~500nm, and considered as nanometer or sub nanometer sized powder, was used in oilfields to enhance water injection by changing wettability of porous media. The mechanism of enhancing water injection is through improving relative permeability of the water-phase by changing wettability induced by adsorption of polysilicon on the porous surface of sandstone. On the other hand, the adsorption on the porous surface and plugging at the small pore throats of the polysilicon may lead to reduction in porosity and absolute permeability (K) of porous media for pore sizes from 100 to 1000,000nm. Thus the degree of success in well treatment is determined by the improvement of effective permeability of the water-phase. In this paper a mathematical model, which was combined with the study of experiments in the laboratory, is presented and a simulator is developed to simulate water injection dynamics under the conditions of polysilicon injection. The simulator can accurately simulate the process of migration and adsorption in the pore bodies and blocking at the pore throat of the polysilicon in the sandstone. A series of numerical simulation runs was conducted to study the effect of a wide range of parameters, such as the sandstone with different permeabilities, concentration of the polysilicon, injection volumes, and others. The effective permeabilities of the water-phase measured by a number of core flooding experiments are matched well by the numerical results. Since April 2000, nine well treatments with solvent slugs of suspended polysilicon particles in several oilfields in China was shown to be successful and the average injection rate increased 5 times after treatments. Introduction A nanometer particle, generally defined as its size from 1 to 100nm and invisible with the naked eyes or ordinary microscope, is referred to as a nanometer scaled ultra fine particle in its size which is larger than an atom cluster and smaller than ordinary micro-powder. Nanometer technology originated at the end of the 1980's and is developed into a new high technology, by which new materials can be formed by rearranging atoms or molecules. A nanometer structured particle material has some special physical effects in its surface, small size, quantum size and macro-quantum tunnel1. Nanometer particle material has a large specific surface area, which increases rapidly with the decrease in diameter of particle. The large surface area leads to an increase in the proportion of atoms on the surface of the particle, which results in an increase in surface energy. The deficiency of atomic coordination and high surface energy leads to the unsteady, high activity of atoms on the particle, the increase in tendency of combination with other atoms, and the appearance of active cores. Non-chemical equilibrium and coordination of non-integer numbers lead to considerable difference in chemical properties and chemical equilibrium systems for nanometer powder. Analogously, sand rock, which is composed of grains with different sizes, is porous media deposited under the combination of consolidation and compaction throughout a long geological period, and also has large specific surface area. Since the property of the surface of minerals determines the wettablity of porous walls, and the wettability of reservoir rock governs, to a great extent, the location, flow, and distribution of oil, water, and gas in a reservoir, the distributive characteristics, relative permeability of water and oil and flow dynamics of fluids in porous media can be changed by modifying the wettability of porous walls. Accordingly, the process of development of a reservoir can be improved by wettability modification.

TX 75083-3836, U.S.A., fax 01-972-952-9435. AbstractA nanometer (10 -9 m) structured particle material, generally so defined that the diameter of the particle is no more than 100nm, has some special physical efficacy in its surface, small size and other properties. One kind of polysilicon with sizes ranging from 10~500nm, and considered as nanometer or sub nanometer sized powder, was used in oilfields to enhance water injection by changing wettability of porous media. The mechanism of enhancing water injection is through improving relative permeability of the water-phase by changing wettability induced by adsorption of polysilicon on the porous surface of sandstone. On the other hand, the adsorption on the porous surface and plugging at the small pore throats of the polysilicon may lead to reduction in porosity and absolute permeability (K) of porous media for pore sizes from 100 to 1000,000nm. Thus the degree of success in well treatment is determined by the improvement of effective permeability of the water-phase.In this paper a mathematical model, which was combined with the study of experiments in the laboratory, is presented and a simulator is developed to simulate water injection dynamics under the conditions of polysilicon injection. The simulator can accurately simulate the process of migration and adsorption in the pore bodies and blocking at the pore throat of the polysilicon in the sandstone. A series of numerical simulation runs was conducted to study the effect of a wide range of parameters, such as the sandstone with different permeabilities, concentration of the polysilicon, injection volumes, and others. The effective permeabilities of the waterphase measured by a number of core flooding experiments are matched well by the numerical results. Since April 2000, nine well treatments with solvent slugs of suspended polysilicon particles in several oilfields in China was shown to be successful and the average injection rate increased 5 times after treatments. chemical properties and chemical equilibrium systems for nanometer powder.Analogously, sand rock, which is composed of grains with different sizes, is porous media deposited under the combination of consolidation and compaction throughout a long geological period, and also has large specific surface area. Since the property of the surface of minerals determines the wettablity of porous walls, and the wettability of reservoir rock governs, to a great extent, the location, flow, and distribution of oil, water, and gas in a reservoir, the distributive characteristics, relative permeability of water and oil and flow dynamics of fluids in porous media can be changed by modifying the wettability of porous walls. Accordingly, the process of development of a reservoir can be improved by wettability modification.

No abstract

No abstract

In response to the lack of specific demonstration and analysis of the research on the necessity of the Lie group strapdown inertial integrated navigation error model based on the Euler angle, two common integrated navigation systems, strapdown inertial navigation system/global navigation satellite system (SINS/GNSS) and strapdown inertial navigation system/doppler velocity log (SINS/DVL), are used as subjects, and the piecewise constant system (PWCS) matrix, based on the Lie group error model, is established. From three aspects of variance estimation, the observability and performance of the system with large misalignment angles for low, medium, and high accuracy levels, traditional error model, Lie group left error model, and right error model are compared. The necessity of research on Lie group error model is analyzed quantitatively and qualitatively. The experimental results show that Lie group error model has better stability of variance estimation, estimation accuracy, and observability than traditional error model, as well as higher practical value.