The high dielectric optical contrast between the amorphous and crystalline structural phases of non-volatile phase-change materials (PCMs) provides a promising route towards tuneable nanophotonic devices. Here, we employ the next-generation PCM In3SbTe2 (IST) whose optical properties change from dielectric to metallic upon crystallization in the whole infrared spectral range. This distinguishes IST as a switchable infrared plasmonic PCM and enables a programmable nanophotonics material platform. We show how resonant metallic nanostructures can be directly written, modified and erased on and below the meta-atom level in an IST thin film by a pulsed switching laser, facilitating direct laser writing lithography without need for cumbersome multi-step nanofabrication. With this technology, we demonstrate large resonance shifts of nanoantennas of more than 4 µm, a tuneable mid-infrared absorber with nearly 90% absorptance as well as screening and nanoscale “soldering” of metallic nanoantennas. Our concepts can empower improved designs of programmable nanophotonic devices for telecommunications, (bio)sensing and infrared optics, e.g. programmable infrared detectors, emitters and reconfigurable holograms.

We present freestanding metasurfaces operating at optical frequencies with a total thickness of only 40 nm. The metasurfaces are fabricated by focused ion beam milling of nanovoids in a carbon film followed by thermal evaporation of gold and plasma ashing of the carbon film. As a first example, we demonstrate a metasurface lens based on resonant V-shaped nanovoids with a focal length of 1 mm. The second example is a metasurface phase-plate consisting of appropriately oriented rectangular nanovoids that transforms a Gaussian input beam into a Laguerre-Gaussian LG−1,0 mode.

We present a combined experimental and numerical study of the far-field emission properties of optical travelling wave antennas made from low-loss dielectric materials. The antennas considered here are composed of two simple building blocks, a director and a reflector, deposited on a glass substrate. Colloidal quantum dots placed in the feed gap between the two elements serve as internal light source. The emission profile of the antenna is mainly formed by the director while the reflector suppresses backward emission. Systematic studies of the director dimensions as well as variation of antenna material show that the effective refractive index of the director primarily governs the far-field emission pattern. Below cut off, i.e., if the director’s effective refractive index is smaller than the refractive index of the substrate, the main lobe results from leaky wave emission along the director. In contrast, if the director supports a guided mode, the emission predominately originates from the end facet of the director.

Optical traveling wave antennas offer unique opportunities to control and selectively guide light into a specific direction, which renders them excellent candidates for optical communication and sensing. These applications require state-of-the-art engineering to reach optimized functionalities such as high directivity and radiation efficiency, low sidelobe levels, broadband and tunable capabilities, and compact design. In this work, we report on the numerical optimization of the directivity of optical traveling wave antennas made from low-loss dielectric materials using full-wave numerical simulations in conjunction with the particle swarm optimization algorithm. The antennas are composed of a reflector and a director deposited on a glass substrate, and an emitter placed in the feed gap between them serves as an internal source of excitation. In particular, we analyze antennas with rectangular- and horn-shaped directors made of either hafnium dioxide or silicon. The optimized antennas produce highly directional emissions due to the presence of two dominant guided TE modes in the director in addition to leaky modes. These guided modes dominate the far-field emission pattern and govern the direction of the main lobe emission, which predominately originates from the end facet of the director. Our work also provides a comprehensive analysis of the modes, radiation patterns, parametric influences, and bandwidths of the antennas, which highlights their robust nature.

We demonstrate the numerical and experimental realization of optimized optical traveling-wave antennas made of low-loss dielectric materials. These antennas exhibit highly directive radiation patterns and our studies reveal that this nature comes from two dominant guided TE modes excited in the waveguide-like director of the antenna, in addition to the leaky modes. The optimized antennas possess a broadband nature and have a nearunity radiation efficiency at an operational wavelength of 780 nm. Compared to the previously studied plasmonic antennas for photon emission, our all-dielectric approach demonstrates a new class of highly directional, low-loss, and broadband optical antennas.