The structure and morphology of homopolymers and blends of rigid‐rod poly(p‐phenylene benzobisthiazole) (PBT) and semiflexible coil poly[2,5(6)benzimidazole] (ABPBI) were examined by wide‐angle x‐ray diffraction and scanning and transmission electron microscopy. When samples were processed from a solution where the total polymer concentration of 30% PBT/70% ABPBI blend was greater than a critical concentration, large‐scale phase separation occurred and 0.1–4 μm ellipsoidal particles were present in a ductile matrix. The ellipsoids were chiefly composed of aggregates of well‐oriented 10‐nm PBT crystallites, while the matrix material was chiefly ABPBI. When the concentration was less than a critical concentration, the solution was optically homogeneous. In processing of fiber and film samples from the homogeneous solution, large‐scale phase separation was inhibited by rapid coagulation in a water bath. After heat treatment, these samples were found to contain crystallites of both PBT and ABPBI with lateral dimensions of ordered regions no larger than 3 nm. The PBT homopolymer was dispersed in the matrix at the molecular level in ordered regions at a scale no larger than 3 nm, resulting in a rigid‐rod molecular composite. In the rigid‐rod molecular composite fiber both the molecular‐level dispersion and high orientation contributed to higher values of strength and modulus compared to the properties of a phase‐separated fiber. The strength and modulus of highly oriented fiber were only 25% higher than those of planar isotropically oriented film, suggesting that the level of dispersion of rod molecules is more important than orientation of the reinforcing phase in rigid‐rod molecular composites.
Recent developments in the synthesis and preparation of high molecular weight polymers have resulted in the generation of two new aromatic heterocyclic polymers with excellent mechanical properties. The polymers are the rigid rod poly-p-phenylene benzobisoxazole (PBO) and the flexible coil poly 2,5(6) benzoxazole (ABPBO). The purpose of this study was to characterize the morphology of PBO and ABPBO in as-spun (AS) and annealed (AN) conditions by the use of transmission electron microscopy (TEM) imaging and diffraction techniques, and to compare the results with other high performance polymers.Samples were prepared for TEM by detachment replication. A JEOL 100CX was operated at 120 kV. Dark field images were formed from the first, second, and third equatorial reflections in the case of PBO, and from the first and second equatorial reflections for ABPBO. In order to minimize beam damage artifacts, the areas of the sample used for dark field imaging were adjacent to those used for locating and focusing.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.