Bioactive glasses (BAGs) have been studied for decades for clinical use, and they have found many dental and orthopedic applications. BAGs have also been shown to have an antibacterial effect e.g., on some oral microorganisms. In this extensive work we show that six powdered BAGs and two sol-gel derived materials have a clear antibacterial effect on 29 clinically important bacterial species. We also incorporated a rapid and accurate flow cytometric (FCM) method to calculate and standardize the numbers of viable bacteria inoculated in the suspensions used in the tests for antibacterial activity. In all materials tested growth inhibition could be demonstrated, although the concentration and time needed for the effect varied depending on the BAG. The most effective glass was S53P4, which had a clear growth-inhibitory effect on all pathogens tested. The sol-gel derived materials CaPSiO and CaPSiO II also showed a strong antibacterial effect. In summary, BAGs were found to clearly inhibit the growth of a wide selection of bacterial species causing e.g., infections on the surfaces of prostheses in the body after implantation.

Bioactive glasses (BAGs) of different compositions have been studied for decades for clinical use and they have found many dental and orthopaedic applications. Particulate BAGs have also been shown to have antibacterial properties. This large-scale study shows that two bioactive glass powders (S53P4 and 13-93) and a sol-gel derived material (CaPSiO II) have an antibacterial effect on 17 clinically important anaerobic bacterial species. All the materials tested demonstrated growth inhibition, although the concentration and time needed for the effect varied depending on the BAG. Glass S53P4 had a strong growth-inhibitory effect on all pathogens tested. Glass 13-93 and sol-gel derived material CaPSiO II showed moderate antibacterial properties.

A firm bond between an implant and the surrounding soft tissue is important for the performance of many medical devices (e.g., stents, canyls, and dental implants). In this study, the performance of nonresorbable and reactive sol-gel-derived nano-porous titania (TiO(2)) coatings in a soft tissue environment was investigated. A direct attachment between the soft tissue and the sol-gel-derived titania coatings was found in vivo after 2 days of implantation, whereas the titanium control implants showed no evidence of soft tissue attachment. The coated implants were in immediate contact with the connective tissue, whereas the titanium controls formed a gap and a fibrous capsule on the implant-tissue interface. The good soft tissue attachment of titania coatings may result from their ability to initiate calcium phosphate nucleation and growth on their surfaces (although the formation of poorly crystalline bonelike apatite does not occur). Thus, the formation of a bonelike CaP layer is not crucial for their integration in soft tissue. The formation of bonelike apatite was hindered by the adsorption of proteins onto the initially formed amorphous calcium phosphate growth centers, thus preventing the dissolution/reprecipitation processes required for the formation of poorly crystalline bonelike apatite. These findings might open novel application areas for sol-gel-derived titania-based coatings.

Sol-gel-derived SiO2 and CaO-P2O5-SiO2 have been shown to be bioactive and bone bonding. In this study bioactive sol-gel-derived SiO2 and CaO-P2O5-SiO2 systems were tested for in in vitro bioactivity. The calcined ceramic monoliths were immersed in a simulated body fluid and analyzed to follow the hydroxyapatite formation on the ceramic surface. Apatite-forming ability was investigated in terms of structural changes by changing the composition and the preparation method. The role of Ca and P dopants in the substrate structure is complicated, and careful characterization is needed. The composition and structure together determine the in vitro bioactivity. The pore structure was analyzed using N2-adsorption/desorption isotherms. The results indicate that a great mesopore volume and a wide mesopore size distribution favor hydroxycarbonate apatite nucleation and a great surface area is not needed. The performed preparation process for silica in a basic environment provides a convenient way to prepare a mesoporous material.