No abstract

The High Resolution Imaging Science Experiment (HiRISE) camera will be launched in August 2005 onboard NASA's Mars Reconnaissance Orbiter (MRO) spacecraft. HiRISE supports the MRO Mission objectives through targeted imaging of nadir and off-nadir sites with high resolution and high signal to noise ratio [a]. The camera employs a 50 cm, f/24 all-reflective optical system and a time delay and integration (TDI) detector assembly to map the surface of Mars from an orbital altitude of ~ 300 km. The ground resolution of HiRISE will be < 1 meter with a broadband red channel that can image a 6 x 12 km region of Mars into a 20K x 40K pixel image. HiRISE will image the surface of Mars at three different color bands from 0.4 to 1.0 micrometers. In this paper the HiRISE mission and its camera optical design will be presented. Alignment and assembly techniques and test results will show that the HiRISE telescope's on-orbit wave front requirement of < 0.071 wave RMS (@633nm) will be met . The HiRISE cross track field is 1.14 degrees with IFOV 1.0 µ-radians.

No abstract

Ball Aerospace is currently under contract to Marshall Space Flight Center (MSFC) in Huntsville, AL to design, build, and test a state-of-the-art lightweight beryllium mirror for cryogenic space applications, the Next Generation Space Telescope (NGST) Sub-scale Beryllium Mirror Demonstrator (SBMD). The mirror is manufactured from spherical powder beryllium and optimized for cryogenic use. This 0.53-meter diameter lightweight mirror (<12 kg/m2) has been tested at MSFC at ambient and cryogenic temperatures down to 23K, cryofigured for optimal performance at 35K, and subsequently retested at cryogenic temperatures. In addition, Ball has a separate contract with MSFC for an Advanced Mirror System Demonstrator (AMSD) to fabricate and test an ultra-lightweight mirror system which extends the semi-rigid SBMD mirror design to a 1.4-meter point-to-point beryllium hexagon mirror, flexures, rigid body and radius of curvature actuators, and reaction structure. This paper will describe the SBMD mirror performance and its cryogenic testing and present an overview of the AMSD semi-rigid beryllium mirror.

An Optical Testing System (OTS) has been developed to measure the figure and radius of curvature of Next Generation Space Telescope (NGST) developmental mirrors in a vacuum, cryogenic environment using the X-Ray Calibration Facility (XRCF) at Marshall Space Flight Center (MSFC). The OTS consists of a WaveScope Shack-Hartmann sensor from Adaptive Optics Associates as the main instrument and a Leica Disto Pro distance measurement instrument. Testing is done at the center of curvature of the test mirror and at a wavelength of 632.8 nm. The error in the figure measurement is ≤λ/13 peak-to-valley (PV). The error in radius of curvature is less than 5 mm. The OTS has been used to test the Subscale Beryllium Mirror Demonstrator (SBMD), a 0.532 m diameter spherical mirror with a radius of curvature of 20 m. SBMD characterization consisted of three separate cryogenic tests at or near 35 K. The first two determined the cryogenic changes in the mirror surface and their repeatability. The last followed cryo-figuring of the mirror. This paper will describe the results of these tests. Figure results will include full aperture results as well as an analysis of the mid-spatial frequency error results. The results indicate that the SBMD performed well in these tests with respect to the requirements of λ/4 PV (full aperture), λ/10 PV (mid-spatial, 1-10 cm), and ±0.1 m for radius of curvature after cryo-figuring.