No abstract

No abstract

No abstract

Helmet and shoulder pad removal in the unstable cervical spine is a complex maneuver. In the unstable C1-C2 segment, helmet removal causes more angulation in flexion, more distraction, and more narrowing of the space available for the cord. In the lower cervical spine (C5-C6), helmet removal causes flexion of 9.32 degrees, and during shoulder pad removal the neck extends 8.95 degrees, a total of approximately 18 degrees. Disc height changes from 1.24 mm of distraction to 1.06 mm of compression during helmet removal and shoulder pad removal for a total 2.3-mm change. Translation, which correlates with the change in the space available for the cord, is greater at C5-C6 during shoulder pad removal. Because most of the cadavers had C5 anteriorly displaced on C6 to begin with, the extension force during shoulder pad removal caused a 3.87-mm change in reduction of C5 on C6. Because of the motion observed in the unstable spine, helmet and shoulder pad removal should be performed in a carefully monitored setting. They should be removed together by at least three, preferably four, trained people.

No abstract