No abstract

Electrodes from carbonized Zn4O(1,4-benzodicarboxylic acid) (MOF-5) structures were prepared successfully via evaporating the solvent with a poly(vinylidene fluoride) (PVDF) binder. The solvent used for a nanocomposite cast was easily removed. Such an elegant method for preparing electrodes provides a facile, cost-effective, and void/cracking-free nanocomposite distribution on the current collector. The highly porous nanoparticles containing pure carbon attach well to the PVDF membrane which results in an increased active surface area of the electrode to 847 m2/g. The electrochemical analysis shows that the best weight ratio of CMOF-5 to PVDF equals 85:15, 80:20, and 75:25, respectively. The specific capacitance of these samples is 218 F/g, 210 F/g, and 180 F/g, correspondingly. An additional advantage of the electrode prepared from the carbonized MOF-5 is the possibility to synthesis MOF structures from recovered substrates used in its synthesis (distilled N,N-Dimethylformamide DMF and terephthalic acid recovered from polyethylene terephthalate waste). We will demonstrate this in this contribution as well. Furthermore, the carbonized MOF-5 can be recovered from the spent electrode and reused again in the electrochemical device.

No abstract

Recently, to meet the growing demand for stable and flexible batteries, anodes in the form of thin films have drawn the attention of researchers. It is clear that mass production of such batteries would bring the worldwide distribution of flexible devices and wearable electronics closer. Currently, electrodes are deposited on a flexible substrate and consist of conductive and binding agents that increase the volume/weight of the electrode. Here, we propose free-standing and non-active-material-free thin films based on reduced graphene oxide (rGO), titanium dioxide (TiO2) and manganese dioxide (MnO2) as working electrodes in lithium-ion half-cells prepared via the vacuum-assisted filtration method. The electrochemical performance of the assembled half-cells exhibited good cyclic stability and a reversible capacity at lower current densities. The addition of TiO2 and MnO2 improved the capacity of the rGO film, while rGO itself provided a stable rate performance. rGO/TiO2/MnO2 film showed the highest discharge capacity (483 mAh/g at 50 mA/g). In addition, all assembled cells displayed excellent repeatability and reversibility in cyclic voltammetry measurements and good lithium-ion diffusion through the electrolyte, SEI layer and the active material itself.

In this contribution, the effect of hydrogenation conditions atmosphere (temperature and time) on physicochemical properties and photocatalytic efficiency of graphitic carbon nitride (g-C3N4, gCN) was studied in great details. The changes in the morphology, chemical structure, optical and electrochemical properties were carefully investigated. Interestingly, the as-modified samples exhibited boosted photocatalytic degradation of Rhodamine B (RhB) with the assistance of visible light irradiation. Among modified gCN, the sample annealed at 500 °C for 4 h (500-4) in H2 atmosphere exhibited the highest photocatalytic activity—1.76 times higher compared to pristine gCN. Additionally, this sample presented high stability and durability after four cycles. It was noticed that treating gCN with hydrogen at elevated temperatures caused the creation of nitrogen vacancies on gCN surfaces acting as highly active sites enhancing the specific surface area and improving the mobility of photogenerated charge carriers leading to accelerating the photocatalytic activity. Therefore, it is believed that detailed optimization of thermal treatment in a hydrogen atmosphere is a facile approach to boost the photoactivity of gCN.