The ability to promote or inhibit specific platelet–surface interactions in well-controlled environments is crucial to studying fundamental adhesion and activation mechanisms. Here, microcontact printing was used to immobilize human fibrinogen covalently in the form of randomly placed, micrometer-sized islands at an overall surface coverage of 20, 50, or 85%. The nonprinted background region was blocked with covalently immobilized human albumin. Platelet adhesion and morphology on each substrate were assessed using combined differential interference and fluorescence microscopy. At 20% coverage, most of the fibrinogen surface features were small round islands, and platelet adhesion and spreading areas were limited by the position and the size of the islands. Platelet circularity, indicated the morphology was mostly rounded. At 50% coverage, some fibrinogen islands coalesced and platelet adhesion and spreading areas increased. Platelet morphology was controlled by the shape of underlying fibrinogen islands, leading to more irregular spreading. At 85% coverage, the fibrinogen pattern was completely interconnected and both platelet adhesion and the spreading area were significantly higher than at lower coverage. In addition, platelets also spread over the albumin regions, suggesting that after a critical surface density of fibrinogen ligands is reached, platelet spreading is no longer inhibited by albumin. Increasing the overall fibrinogen coverage resulted in higher activation levels defined by key morphological characteristics of the spreading platelet.

Chondroitin sulfate (CS) proteoglycans (CSPGs) are known to be primary inhibitors of neuronal regeneration at scar sites. However, a variety of CSPGs are also involved in neuronal growth and guidance during other physiological stages. Sulfation patterns of CS chains influence their interactions with various growth factors in the central nervous system (CNS), thus influencing neuronal growth, inhibition, and pathfinding. This report demonstrates the use of differentially sulfated CS chains for neuronal navigation. Surface-immobilized patterns of CS glycosaminoglycan chains were used to determine neuronal preference toward specific sulfations of five CS variants: CS-A, CS-B (dermatan sulfate), CS-C, CS-D, and CS-E. Neurons preferred CS-A, CS-B, and CS-E and avoided CS-C containing lanes. In addition, significant alignment of neurites was observed using underlying lanes containing CS-A, CS-B, and CS-E chains. To utilize differential preference of neurons toward the CS variants, a binary combinations of CS chains were created by backfilling a neuro-preferred CS variant between the microcontact printed lanes of CS-C stripes, which are avoided by neurons. The neuronal outgrowth results demonstrate for the first time that a combination of sulfation variants of CS chains without any protein component of CSPG is sufficient for directing neuronal outgrowth. Biomaterials with surface immobilized GAG chains could find numerous applications as bridging devices for tackling CNS injuries where directional growth of neurons is critical for recovery.

Depositing multiple proteins on the same substrate in positions similar to the natural cellular environment is essential to tissue engineering and regenerative medicine. In this study, the development and verification of a multi-protein micro-contact printing (μCP) technique is described. It is shown that patterns of multiple proteins can be created by the sequential printing of proteins with μm precision in registration using an inverted microscope. Soft polymeric stamps were fabricated and were mounted on a microscope stage while the substrate to be stamped was placed on a microscope objective and kept at its focal distance. This geometry allowed for visualization of patterns during the multiple stamping events and facilitated the alignment of multiple stamped patterns. Astrocytes were cultured over stamped lane patterns and were seen to interact and align with the underlying protein patterns.

Surface-adsorbed fibrinogen (FBG) was recognized by adhering astrocytes and removed from the substrates in vitro by a two-phase removal process. The cells removed adsorbed FBG from binary proteins surface patterns (FBG + laminin, or FBG + albumin) while leaving the other protein behind. Astrocytes preferentially expressed chondroitin sulfate proteoglycan (CSPG) at the loci of fibrinogen stimuli; however no differences in overall CSPG production as a function of FBG surface coverage were identified. Removal of FBG by astrocytes was also found to be independent of transforming growth factor type β (TGF-β) receptor based signaling as cells maintained CSPG production in the presence of TGF-β receptor kinase inhibitor, SB 431542. The inhibitor decreased CSPG expression, but did not abolicsh it entirely. Because blood contact and subsequent FBG adsorption are unavoidable in neural implantations, the results indicate that implant-adsorbed FBG may contribute to reactive astrogliosis around the implant as astrocytes specifically recognize adsorbed FBG.

To modulate the surface properties of collagen and subsequent cell-surface interactions, a method was developed to transfer protein patterns from glass coverslips to collagen type I hydrogel surfaces. Two proteins and one proteoglycan found in central nervous system extracellular matrix as well as fibrinogen were patterned in stripes onto collagen hydrogel and astrocytes were cultured on these surfaces. The addition of the stripe protein patterns to hydrogels created astrocyte layers in which cells were aligned with underlying patterns and had reduced chondroitin sulfate expression compared to the cells grown on collagen alone. Protein patterns were covalently cross-linked to the collagen and stable over four days in culture with no visible cellular modifications. The present method can be adapted to transfer other types of protein patterns from glass coverslips to collagen hydrogels.