No abstract

A new method of emulsified oil separation for oily wastewater incorporating simple operation and shortened treatment time is necessary for improved wastewater treatment in some manufacturing plants. In the present study, the removal of emulsified oil from water by coagulation and foam separation using poly aluminum chloride (PAC) and milk casein was examined. By adding casein before the foam separation process, the oil removal was dramatically improved. By using surfactant (LAS) as a frother, the dosage of casein was drastically reduced. Furthermore, for processing actual oily water, LAS was unnecessary because a sufficient amount of surfactants for foaming was included in the wastewater. For treatment of the actual oily wastewater collected from a steel manufacturing plant, the optimum condition for PAC and casein was 30 mg-Al/L and 10 mg/L, respectively, and the oil concentration decreased from 170 mg/L to 2.2 mg/L. After examining several types of oily wastewater, 96 -99% of oil removal efficiency was obtained by adjusting the dosages of PAC and casein. Coagulation and foam separation using casein has shown a high potential as an alternative method to dissolved air flotation (DAF) for processing emulsified oil water.

No abstract

No abstract

No abstract