The purpose of this research is to establish the technology of 3D printable production on the principle of FDM of gears made of PLA, ABS and PETG mainly. In the paper we present first the dimensional generation and specific aspects that need to be considered to produce gears with internal or external teeth of the cylindrical type with vertical or inclined teeth. Generating the gears appeared as a necessity for the reconditioning of the components of the processing machines and of the electric machines made both in the process of elaboration of the bachelor�s and the laboratory works, with reduced energy resource consumption and low pollution as low as possible. After the construction, we past to identify the dimension that have implications for both mechanical and kinematic resistance to achieve a product with good cinematic and functional characteristics. After that are made an analysis of the layers generated, both from the computer simulation and from the point of view of the analysis of layers physically generated on a gear tooth with external teeth.

The paper presents research made in order to assure additional conditions, compared to those in the general standard, to brazing rods, in order to guarantee safety for the environment and for the brazed joints, against corrosion and embrittlement, in high risk conditions. Environmental safety is ensured by limiting the amount, at 0.25% in depositions, of dangerous residual elements at: Cd<0.1%; Hg<0.1%; Pb<0.1%; Cr<0.1%; As<0.1%. The safety of structures against corrosion is provided by the alloying level of deposits and by neutralizing the coat’s activity. The structure safety towards the embrittlement of brazed joints is ensured by limiting the content of embrittling elements, namely: Sb+Fe+Bi at a maximum of 0.3% and the content of diffusible hydrogen at maximum 5 cm3/100g raw material and by limiting the coat humidity at maximum 10%. The experiments were performed to ensure the set out requirements by following the selection of raw materials on the input criteria of prohibited chemicals, reducing the water content from the elements that make up the coat and by diminishing it’s hygroscopicity by neutralizing it. Prescribing additional conditions has an effect on manufacturing costs, which requires productivity increase at brazing, diminishing work temperature, increasing the moistening capacity of products, reducing the smoke level, effects pursued by the research.

In this research are establish the technology of 3D printable parts by the principle of FDM 3D printed for threaded made by PLA, ABS, Nylon or PETG. In the paper are present first the dimensional generation and specific aspects that need to be considered to produce threaded with internal teeth of the metric, round or trapezoidal type. Generating the threaded appeared as a necessity for the reconditioning or made of the components of the processing machines made both in the process of elaboration of the bachelor�s and the laboratory works, with reduced energy resource consumption and low pollution as low as possible. After the construction, it is identify the dimension that have implications for both mechanical and kinematic resistance to make a product with good cinematic and functional characteristics. After that are made an analysis of the layers generated, both from the computer simulation and from the point of view of the analysis of layers physically generated for a threaded with internal teeth. At the end are presented which are necessary for operations to obtain a product with good features starting from two types of thread generated 8x2 and 10x2 moments.

The paper presents research conducted for the development of precursors and wrapped rods for brazing, that deposit, through melting, two different alloys, with respect to the level of silver alloying and the melting temperature. The alloy with the high silver content is introduced under the form of powder, in the coating of the brazing rods, in a participation proportion that assures a buffer layer, with advance proprieties of diffusion in the base metal and in the core alloy of the coated rod. The participation ratio of the silver rich powder alloy is established within the following limits 8-12%, depending on their melting point, the grinding degree and mixing with the deoxidizer coat. The development of the precursors was made by homogeneous melting and spraying on a oblique plan, the grains obtained were grounded, the grist obtained is considered optimum to be introduced in the coating mixture after it successfully passed through a sieve with a mesh of 0.1 mm. The alloyed precursors with 45% silver, grounded between the above mentioned limits, were introduced in the deoxidizer coat mixture af the bare rods type Ag30 according to SR EN 1044/1999. The resulted mixture was used to manufacture experimental lots of covered rods for brazing, which were used for testing, in order to achieve highly important joints. The melting temperature of the precursors was established through micro-alloying so that it will be 10-15°C higher than that of the deoxidizer coat, which in turn has a lower melting temperature, by 56-60°C, than the melting temperature of the core alloy. The deoxidizer coat is usually fluoroboric type, conforming to SR EN 1045/2001. Representative joints made with the new experimental rods, after testing, presented results consistent with the requirements, which allowed the authors to appreciate this method as appropriate for cost reduction with brazing materials in the use of composite coated rods.

The quality of an academic educational system can be seen in the educational performances of students, but most of all in the way it ensures a professional career that is adequate to their studies. One can think of concepts as: education for a career, development, planning and management of the career, methods, instruments, strategies and techniques in the management of potential and implied risks. The characteristics of an education for a career in university training are presented in comparison to stages of one’s professional activity. The paper introduces the strategies for career management and techniques of making successful planning.