No abstract

No abstract

Capacitive deionization (CDI) with carbon aerogels has been shown to remove various inorganic species from aqueous solutions, though no studies have shown the electrosorption behavior of multisolute systems in which ions compete for limited surface area. Several experiments were conducted to determine the ion removal capacity and selectivity of carbon aerogel electrodes, using both laboratory and natural waters. Although carbon aerogel electrodes have been treated as electrical double-layer capacitors, this study showed that ion sorption followed a Langmuir isotherm, indicating monolayer adsorption. The sorption capacity of carbon aerogel electrodes was approximately 1.0-2.0 x 10(-4) equiv/g aerogel, with ion selectivity being based on ionic hydrated radius. Monovalent ions (e.g., sodium) with smaller hydrated radii were preferentially removed from solution over multivalent ions (e.g., calcium) on a percent or molar basis. Because of the relatively small average pore size (4-9 nm) of the carbon aerogel material, only 14-42 m2/g aerogel surface area was available for ion sorption. Natural organic matter may foul the aerogel surface and limit CDI effectiveness in treating natural waters.

The preparation and characterization of high surface area ruthenium/carbon aerogel composite electrodes for use in electrochemical capacitors is reported. These new materials have been prepared by the chemical vapor impregnation of ruthenium into carbon aerogels to produce a uniform distribution of adherent ≈20 Å nanoparticles on the aerogel surface. The electrochemically oxidized ruthenium particles contribute a pseudocapacitance to the electrode and dramatically improve the energy storage characteristics of the aerogel. These composites have demonstrated specific capacitances in excess of 200 F/g, in comparison to 95 F/g for the untreated aerogel.