High entropy alloys (HEA) are metallic materials obtained from a mixture of at least five atomic-scale chemical elements. They are characterized by high mechanical strength, good thermal stability and hardenability. AlCrFeCoNi alloys have high compression strength and tensile strength values of 2004 MPa, respectively 1250 MPa and elongation of about 32.7%. These materials can be used to create HEA-steel type composite structures which resist to dynamic deformation during high speed impacts. The paper presents four different composite structures made from a combination of HEA and carbon steel plates, using different joining processes. The numerical simulation of the impact behavior of the composite structures was performed by virtual methods, taking into account the mechanical properties of both materials. For analyzing each constructive variant, three virtual shootings were designed, using a 7.62 × 39 mm cal. incendiary armor-piercing bullet and different impact velocities. The best ballistic behavior was provided by the composite structures obtained by welding and brazing that have good continuity and rigidity. The other composite structures, which do not have good surface adhesion, show high fragmentation risk, because the rear plate can fragment on the axis of shooting due to the combination between the shock waves and the reflected ones. The order of materials in the composite structure has a very important role in decreasing the impact energy.

No abstract

The explosive effect and high velocity penetration of the ballistic projectiles of various sizes, design and compositions, on impact with different targets (armors composed of a combination of different metals) are complex. Both practical experiments and mathematical modeling of the phenomena associated to the interaction projectile-target are required to estimate their effect or to design more efficient projectiles and armor. In this study, the basic element of the simulation model is an incendiary projectile of caliber 7.62 mm with medium piercing power, launched with a maximum speed of 750 ms-1 on the multi-material target, which contains 4 different layers assembled into a ballistic cassette made of aluminum. The purpose of this ballistic cassette is to ensure a better contact and handling of multi-layer materials. The proposed model was calculated using mathematical modeling and empirical material constants to describe the nonlinear transitory impact process. Mathematical simulation of the impact between the projectile and target during impact shows that the projectile moves sequentially through the ballistic package, causing perforation, plastic deformation and heating, the resulting fragments being then expelled into the space around the target. The model indicates that the projectile will penetrate the front aluminum plate, as well as the AlCrFeCoNi and steel plates, but will be stopped by the aluminum backing plate. The real impact tests carried out using the ballistic cassette at dynamic impact with the 7.62mm incendiary projectile confirm the model assumptions, which prove the capacity of the composite model to safely stop the projectile.

No abstract

The paper deals with constitutive models determination for a group of high entropy materials (coded Bl-x). The procedure includes the following steps: experimental determination of mechanical characteristics for quasi-static domain through compression tests, correction of experimental data of quasi-static tests using numerical simulation, acquisition of experimental data obtained on the Split Hopkinson Pressure Bars and their simulated interpretation. Using the processed data, the constitutive patterns of the materials under investigation are drawn. The experimental data correction for quasi-static tests performed using numerical simulation involves drawing the engineering stress/strain diagram, the transition to the plastic characteristic diagram in the hypothesis of perfectly cylindrical shape of the specimen throughout the test, simulation of the compression deformation process in the presence of friction force on the end specimen surfaces and the correction of the characteristic plastic diagram using the calculated error. Dynamic data obtained on Split Hopkinson Pressure Bar were interpreted using a methodology previously published. Experimental data under real conditions are compared with data obtained by numerical simulation on an elasto-plastic model. The viscous component of the dynamic response is the difference between the real and simulated on the elasto-plastic model responses.