No abstract

No abstract

New design method based on CFD and AM technology was applied to milli-reactors. CFD simulations were validated empirically with step responses and model reactions. 4-way inlet reactor with zigzag mixing channel showed the best mixing performance. a b s t r a c tThe mixing performance of three passive milli-scale reactors with different geometries was investigated at different Reynolds numbers. The effects of design and operating characteristics such as mixing channel shape and volume flow rate were investigated. The main objective of this work was to demonstrate a process design method that uses on Computational Fluid Dynamics (CFD) for modeling and Additive Manufacturing (AM) technology for manufacture. The reactors were designed and simulated using SolidWorks and Fluent 15.0 software, respectively. Manufacturing of the devices was performed with an EOS M-series AM system.Step response experiments with distilled Millipore water and sodium hydroxide solution provided time-dependent concentration profiles. Villermaux-Dushman reaction experiments were also conducted for additional verification of CFD results and for mixing efficiency evaluation of the different geometries. Time-dependent concentration data and reaction evaluation showed that the performance of the AM-manufactured reactors matched the CFD results reasonably well. The proposed design method allows the implementation of new and innovative solutions, especially in the process design phase, for industrial scale reactor technologies. In addition, rapid implementation is another advantage due to the virtual flow design and due to the fast manufacturing which uses the same geometric file formats.

Laser welding has an ever growing role in manufacturing technology. Keyhole laser welding is the most important laser welding process in metal industry when exceeding the 1 mm weld penetration. This process uses efficiently the high energy density of a laser beam to vaporize and melt materials, thus producing a keyhole in the material via which the energy is brought to it. The requirements from customer side and the development of new materials have been giving justification for the development of new laser types suitable for material processing with ever higher power values. In contrast, the development of laser technologies has made it possible to build more powerful lasers with excellent beam properties and good electrical efficiency. New laser sources with good absorption and beam quality make the laser welding even more efficient when throughput and efficiency are considered. They show their ability to produce narrower welds with lower line energy. However, the validation of actual keyhole shape, size, and behaviour against the models is still lacking because of the difficulties in performing the measurements of the actual dimensions. It has been shown that the better the beam quality the higher the welding speed. When welding with high power, good beam quality, and wavelength close to 1000 nm, there are some obstacles to overcome, which are caused by high absorption and power density. Typically, problems, such as thermal lensing, can be avoided with proper parameter and tool selection. Typically, the size of the keyhole is according to the focal point size, and the stability of the keyhole plays a major role when considering the ability of the laser welding process to produce high quality welds.

No abstract