The ITER Ion Cyclotron Heating and Current Drive system will deliver 20MW of radio frequency power to the plasma in quasi continuous operation during the different phases of the experimental programme. The system also has to perform conditioning of the tokamak first wall at low power between main plasma discharges. This broad range of reqiurements imposes a high flexibility and a high availabiUty. The paper highlights the physics and design reqiurements on the IC system, the main features of its subsystems, the predicted performance, and the current procurement and installation schedide.

The ITER Neutral Beam Test Facility (NBTF), called PRIMA (Padova Research on ITER Megavolt Accelerator), is hosted in Padova, Italy and includes two experiments: MITICA, the full-scale prototype of the ITER heating neutral beam injector, and SPIDER, the full-size radio frequency negative-ions source. The NBTF realization and the exploitation of SPIDER and MITICA have been recognized as necessary to make the future operation of the ITER heating neutral beam injectors efficient and reliable, fundamental to the achievement of thermonuclear-relevant plasma parameters in ITER. This paper reports on design and R&D carried out to construct PRIMA, SPIDER and MITICA, and highlights the huge progress made in just a few years, from the signature of the agreement for the NBTF realization in 2011, up to now-when the buildings and relevant infrastructures have been completed, SPIDER is entering the integrated commissioning phase and the procurements of several MITICA components are at a well advanced stage.

The Electron Cyclotron (EC) system for the ITER tokamak is designed to inject ≥20 MW RF power into the plasma for Heating and Current Drive (H&CD) applications. The EC system consists of up to 26 gyrotrons (between 1 to 2 MW each), the associated power supplies, 24 transmission lines and 5 launchers. The EC system has a diverse range of applications including central heating and current drive, current profile tailoring and control of plasma magneto-hydrodynamic (MHD) instabilities such as the sawtooth and neoclassical tearing modes (NTMs). This diverse range of applications requires the launchers to be capable of depositing the EC power across nearly the entire plasma cross section. This is achieved by two types of antennas: an equatorial port launcher (capable of injecting up to 20 MW from the plasma axis to mid-radius) and four upper port launchers providing access from inside of mid radius to near the plasma edge. The equatorial launcher design is optimized for central heating, current drive and profile tailoring, while the upper launcher should provide a very focused and peaked current density profile to control the plasma instabilities.The overall EC system has been modified during the past three years taking into account the issues identified in the ITER design review from 2007 and 2008 as well as integrating new technologies. This paper will review the principal objectives of the EC system, modifications made during the past two years and how the design is compliant with the principal objectives.

Following the allocation of the procurement of the diagnostic neutral beam (DNB) to the Indian DA, a series of tasks have been undertaken to first assess the DNB configuration and arrive at an optimal beam-line configuration folding in the gas-feed and vacuum-pumping requirements. Specific emphasis is placed on the thermal, structural, and electrical designs of beam-line components, in order to ensure their compatibility with the criteria specified for ITER in vessel components, i.e., Structural Design Criteria for In-Vessel Components. The detailed assessment of manufacturing technologies and their compatibility with the ITER standards forms an integral part of the design. A common approach to manufacturing for DNB and heating-and-current-drive NB components shall be undertaken through a comprehensive prototyping phase which shall lead to built-to-print specifications. In addition to safety and remote-handling issues, the design also addresses the requirements of interfaces related to other systems such as cryo, hydraulic, pneumatic, vacuum pumping, gas feed, civil, power supplies and transmission, CODAC, etc. The successful delivery of DNB is dependent on two critical R&D aspects: 1) the production of a uniform low-divergence beam from the beam source and 2) a well-controlled transmission through lengths of ∼22 m. The first shall primarily be a subject of the Ion Source Test Facility-SPIDER [part of NB test facility (MITICA in Padova)]-where India is involved as a collaborator and the Indian test bed, where issues for DNB beam source which were not resolved in the SPIDER would be taken up. The second shall form one of the primary objectives of the Indian test bed to characterize the DNB. This paper presents the progress in DNB from the concept level to an engineered system along with the plans for system integration and an R&D intensive implementation.Index Terms-Beam transmission, beam-line components (BLCs), concept, diagnostic neutral beam (NB) (DNB), ITER.

The ITER project requires additional heating by two neutral beam injectors, each accelerating to 1 MV a 40 A beam of negative deuterium ions, to deliver to the plasma a power of about 17 MW for one hour. As these requirements have never been experimentally met, it was Nuclear Fusion Progress in the realization of the PRIMA neutral beam test facility