No abstract

Downloaded From: http://proceedings.spiedigitallibrary.org/ on 06/15/2016 Terms of Use: http://spiedigitallibrary.org/ss/TermsOfUse.aspxThe papers in this volume were part of the technical conference cited on the cover and title page. Papers were selected and subject to review by the editors and conference program committee. Some conference presentations may not be available for publication. Additional papers and presentation recordings may be available online in the SPIE Digital Library at SPIEDigitalLibrary.org.The papers reflect the work and thoughts of the authors and are published herein as submitted. The publisher is not responsible for the validity of the information or for any outcomes resulting from reliance thereon.Publication of record for individual papers is online in the SPIE Digital Library. SPIEDigitalLibrary.orgPaper Numbering: Proceedings of SPIE follow an e-First publication model. A unique citation identifier (CID) number is assigned to each article at the time of publication. Utilization of CIDs allows articles to be fully citable as soon as they are published online, and connects the same identifier to all online and print versions of the publication. SPIE uses a six-digit CID article numbering system structured as follows: The first four digits correspond to the SPIE volume number.  The last two digits indicate publication order within the volume using a Base 36 numbering system employing both numerals and letters. These two-number sets start with 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 0A, 0B … 0Z, followed by 10-1Z, 20-2Z, etc. The CID Number appears on each page of the manuscript. Proc. of SPIE Vol. 9736 973601-2 Downloaded From: http://proceedings.spiedigitallibrary.org/ on 06/15/2016 Terms of Use: http://spiedigitallibrary.org/ss/TermsOfUse.aspx

Higher and higher through-puts in marking industry are todays requirements. Mainly packaging industry or cable marking companies ask for part-by-part varying markings like serial numbers, weight, date or barcodes. That gives a need to devel op a flexible, high-speed on-the-fly marking technique. Current laser marking techniques like direct writing using a scanned laser beam or excimer laser fixed mask projection offer proven quality and either flexibility or detailism. Their drawbacks are limited speed (direct writing) and invariability (fixed mask projection). The Fraunhofer IWS developed a marking system using excimer laser mask projection with a micro mirror device (MMD) as computer-controlled 'flexible mask. 'The idea is to generate complex markings within one laser pulse so the marking speed is only limited by the laser repetition rate. The IWS used a 308nm excimer laser and a reflective phase-shifting mask from Fh IMS to demonstrate the marking capabilities. It was possible to generate free-programmable, high-contrast markings on common materials like paper and plastic. Furthermore, it could be shown that the technique is also usable to generate 3D structures in PI. Result of the studies is the development of a very fast marking technique using MMDs in combination with short wavelength and short pulse lasers. It also has high potential in 3D laser micromachining

No abstract