For high-temperature applications, creep strength is of major concern, in addition to oxidation and corrosion resistance, and determines the application range of titanium aluminide alloys in competition with other structural materials. Thus, this work was aimed at identifying mechanisms of creep deformation and microstructural degradation and at developing alloying concepts with respect to an enhanced high-temperature capability. The analysis shows that dislocation climb controls deformation in the range of the intended operation temperatures. Further, complex processes of phase transformations, recrystallization, and microstructural coarsening were observed, which contribute to microstructural degradation and limit component life in long-term service. By alloying with high contents of Nb, both room-and high-temperature strength properties can be improved as Nb increases the activation energy of diffusion and increases the propensity for twinning at ambient temperature. For alloys with enhanced hightemperature capability, microalloying with carbon is also of particular use, because carbide precipitates effectively hinder dislocation motion and are thought to increase microstructural stability.

No abstract

Wrought TiAl products manufactured by conventional hot-working procedures, such as forging and extrusion, suffer from structural and chemical inhomogeneities, which are major concerns for the reliability of components. In an attempt to overcome these problems, TiAl alloys were hot worked by torsional deformation. Using this method, a much higher strain and mechanical work can be imparted, which triggers dynamic recrystallization. The metallurgical potential of this technique will be assessed. Particular emphasis is placed on shear localization processes, which often lead to premature failure of the workpiece.

No abstract

No abstract