This cross-sectional study examined the risk factors affecting adverse health effects from benzene exposure among gasoline station workers in Khon Kean province, Thailand. An interview questionnaire of adverse symptoms relating to benzene toxicity was administered to 151 workers. Area samplings for benzene concentration and spot urine for tt-muconic acid (tt-MA), a biomarker of benzene exposure, were collected. The factors associated with adverse symptoms were analysed by using multiple logistic regression. It was found that these symptoms mostly affected fuelling workers (77.5%), and the detected air benzene reached an action level or higher than 50% of NIOSH REL (>50 ppb). The top five adverse symptoms, i.e., fatigue, headache, dizziness, nasal congestion, and runny nose, were reported among workers exposed to benzene. More specific symptoms of benzene toxicity were chest pain, bleeding/epistaxis, and anaemia. The detected tt-MA of workers was 506.7 ug/g Cr (IQR), which was a value above the BEI and higher than that of asymptomatic workers. Risk factors significantly associated with adverse symptoms, included having no safety training experience (ORadj = 5.22; 95% CI: 2.16–12.58) and eating during work hours (ORadj = 16.08; 95% CI: 1.96–131.74). This study urges the tightening of health and safety standards at gasoline stations to include training and eating restrictions while working in hazardous areas.

Recently, levels of air pollution caused by exhaust gases from infectious waste combustion have been rising at a startling rate. Pollutant gases such as carbon monoxide (CO) and nitrogen dioxide (NO2) have numerous health implications when unsafe amounts are released into the atmosphere. Thus, Pollution Control Systems (PCS) and Gas Cleaner Systems (GCS) play an important role in industries and the monitoring of incinerators. This research evaluated the GCS of rotary kilns in medical facilities located in the Northeast of Thailand. Data was collected from various sites, analyzed, and examined. Furthermore, Ozone (O3) technology was applied to the rotary kiln allowing for the collection of new information on the pollution treatment systems. O3 technology was installed along with the Wet Scrubber System (WSS) catalyzing the oxidation of O3 and pollutant gases. In addition, a chiller was added to control and stabilize the temperature of the water. After the water temperature was controlled, the concentration of O3 increased resulting in an efficient pollution treatment system. Levels of pollutant gas emission were found to be beneath control standards of both Thailand and those of the U.S. EPA. TSP content was reduced significantly from 22.0 mg/m³ to 3.4 mg/m³ (97%), CO content from 13.6 mg/m³ to 1.7 mg/m³ (96%), and NO₂ content fell from 16.3 (mg/m³) to 2.0 mg/m³ (99%). It is clear that the rotary kiln and Ozone technology should be used together in order to create a new and far more effective method of pollution treatment in small and mid-sized cities of Thailand.

An ever-increasing demand for electrical power and soaring levels of energy consumption around the world have led to an energy crisis. Thus, this paper aims to review the conventional technologies against those of newer developments in electrical power generation such as using nitrogen generators. The nitrogen generator method is most appealing as it is a seemingly free energy already existing in nature. A nitrogen generator with a 5000 (Nm3/h) capacity has the potential to be used to analyze gas composition and the results are compared with the gas composition of a conventional steam turbine, which is used to pressurize 6000 (kWh) injection steam turbines. The magnetic bearing must be installed in both systems to modify all centrifuged systems which reduces all energy consumption in all systems by more than 50%. Artificial intelligence is used with the machine to analyze and control nitrogen gas flow to provide a more precise evaluation resulting in a more efficient technology. It should further be noted that the nitrogen turbine is superior to the steam turbine because it does not require the burning of fossil fuel to generate power. Hence, it is crucial to modify conventional technologies to improve energy sustainability and begin the long task of tackling environmental issues.

The alarming rate at which infectious waste is growing was an unsolved problem worldwide before the pandemic, and it has only gotten worse. It is especially prominent in the medical services, owing to the improper use or the lack of high-efficiency waste management systems. To address this issue, this paper presents a modification to the conventional rotary kiln incineration method using add-on ozone (O3) at a concentration of 100–160 g/h in order to enhance its efficiency when treating emitted air pollutants. These pollutants of Hg, HF, TSP, SO2, NO2, CO, and HCl were measured, and their percent opacity concentrations were 0.006 mg/m3, 0.680 mg/m3, 21.900 mg/m3, 5.600 mg/m3, 16.300 mg/m3, 13.700 mg/m3, 0.022 mg/m3, and 6%, respectively. The amounts of these air pollutants were considerably lower than those released from a rotary kiln incinerator without the add-on ozone. Additionally, all the measurements were lower than the emission thresholds established in the US Environmental Protection Agency Emission Standards Reference Guide. Therefore, using the proposed rotary kiln incineration method modified with add-on ozone is suitable for use in the elimination of infectious waste in that it drastically reduces air pollution and improves air quality, resulting in environmental improvements aimed at mitigating the devastating impacts pollution has on human health.

No abstract