Large-eddy simulation data for a Mach 1.3 round jet are decomposed into acoustic, hydrodynamic and thermal components using Doak's momentum potential theory. The decomposed fields are then analysed to examine the properties of each mode and their dynamics based on the transport equation for the total fluctuating enthalpy. The solenoidal fluctuations highlight hydrodynamic components of the jet and capture the shear layer growth and breakdown process. The acoustic mode exhibits a jittering coherent wavepacket structure in the turbulent region and consequent highly directional downstream radiation. The expected radial decay rates, r for acoustic, are recovered and closely follow the universal radiation spectra in the sideline and downstream directions. The scalogram of the acoustic mode in the near-acoustic-field region is consistent with that of the pressure perturbation signal in the acoustic-frequency range, but effectively removes the hydrodynamic and thermal content. The time-resolved and mean behaviour of terms in the total fluctuating enthalpy equation is analysed in detail. A large-scale intermittent event in the near-acoustic field is shown to be associated with an intrusion of vortices from the shear layer into the core of the jet. Acoustic sources are created when the resulting negative fluctuations in the solenoidal component interact with positive fluctuations in the Coriolis acceleration term. The latter are associated with regions of high vorticity on the inner side of the shear layer. In contrast, sinks result from the interaction of solenoidal momentum fluctuations with positive entropy gradients along entrainment streaks.

Discrete unstable modes of hypersonic laminar boundary layers, obtained from an eigenvalue analysis, provide insight into key transition scenarios. The character of such modes near the leading edge is often identified with the corresponding asymptotic free-stream behaviour of acoustic, vortical or entropic (thermal) content, which we designate fluid-thermodynamic (FT) components. In downstream regions, however, this direct one-to-one correspondence between discrete modes and FT components does not hold, since FT components interact in well-defined ways with the basic state and with each other (even under linear scenarios). In the present work, we perform an FT decomposition of discrete modes using momentum potential theory, to yield a physics-based analysis that complements linear stability theory in the linear regime, and seamlessly extends to the nonlinear domain where direct numerical simulations are appropriate. Linear and nonlinear saturated disturbance effects, different forcing types and wall thermal conditions are considered, with emphasis on phenomena occurring near stability-mode synchronization locations. The results show that, in the linear regime, each discrete mode contains all FT components, whose relative amplitudes vary with streamwise distance. Vortical components are always the largest, followed by thermal and acoustic components. These latter two show distinct fore and aft signatures near mode synchronization. The vortical component displays a series of rope-shaped recirculation-cell patterns across the generalized inflection point. However, both acoustic and thermal components display ‘trapped’ structures. The former contains an alternating monopole array between the wall and the critical layer, while the latter is confined to an undulating region between the wall and a wavy locus straddling the generalized inflection point. Nonlinear saturation in the region of Mack-mode growth further strengthens the rope-shaped structures in the vortical component and higher harmonics appear, whose form and location depend on the specific component. Wall cooling modifies the eigenfunctions such that the acoustic component accounts for more of its composition, consistent with its destabilization. Analysis of energy interactions among the FT components indicates that, even though the vorticity component is the largest, the thermal component induces the most significant source term for the growth of acoustic perturbations, possibly due to the trapped nature of both.

No abstract

No abstract

Small perturbation propagation in fluid flows is usually examined by linearizing the governing equations about a steady basic state. It is often useful, however, to study perturbation evolution in the unsteady evolving turbulent environment. Such analyses can elucidate the role of perturbations in the generation of coherent structures or the production of noise from jet turbulence. The appropriate equations are still the linearized Navier-Stokes equations, except that the linearization must be performed about the instantaneous evolving turbulent state, which forms the coefficients of the linearized equations. This is a far more difficult problem since in addition to the turbulent state, its rate of change and the perturbation field are all required at each instant. In this paper, we develop and use a novel technique for this problem by using a pair (denoted "baseline" and "twin") of simultaneous synchronized Large-Eddy Simulations (LES). At each time-step, small disturbances whose propagation characteristics are to be studied, are introduced into the twin through a forcing term. At subsequent time steps, the difference between the two simulations is shown to be equivalent to solving the forced Navier-Stokes equations, linearized about the instantaneous turbulent state. The technique does not put constraints on the forcing, which could be arbitrary, e.g., white noise or other stochastic variants. We consider, however, "native" forcing having properties of disturbances that exist naturally in the turbulent environment. The method then isolates the effect of turbulence in a particular region on the rest of the field, which is useful in the study of noise source localization. The synchronized technique is relatively simple to implement into existing codes. In addition to minimizing the storage and retrieval of large time-varying datasets, it avoids the need to explicitly linearize the governing equations, which can be a very complicated task for viscous terms or turbulence closures. The method is illustrated by application to a well-validated Mach 1.3 jet. Specifically, the effects of turbulence on the jet lipline and core collapse regions on the near-acoustic fields are isolated. The properties of the method, including linearity and effect of initial transients, are discussed. The results provide insight into how turbulence from different parts of the jet contribute to the observed dominance of low and high frequency content at shallow and sideline angles, respectively.