A B S T R A C TAn approach to determining the effective elastic moduli of rocks with double porosity is presented. The double-porosity medium is considered to be a heterogeneous material composed of a homogeneous matrix with primary pores and inclusions that represent secondary pores. Fluid flows in the primary-pore system and between primary and secondary pores are neglected because of the low permeability of the primary porosity. The prediction of the effective elastic moduli consists of two steps. Firstly, we calculate the effective elastic properties of the matrix with the primary small-scale pores (matrix homogenization). The porous matrix is then treated as a homogeneous isotropic host in which the large-scale secondary pores are embedded. To calculate the effective elastic moduli at each step, we use the differential effective medium (DEM) approach. The constituents of this composite medium -primary pores and secondary poresare approximated by ellipsoidal or spheroidal inclusions with corresponding aspect ratios.We have applied this technique in order to compute the effective elastic properties for a model with randomly orientated inclusions (an isotropic medium) and aligned inclusions (a transversely isotropic medium). Using the special tensor basis, the solution of the one-particle problem with transversely isotropic host was obtained in explicit form.The direct application of the DEM method for fluid-saturated pores does not account for fluid displacement in pore systems, and corresponds to a model with isolated pores or the high-frequency range of acoustic waves. For the interconnected secondary pores, we have calculated the elastic moduli for the dry inclusions and then applied Gassmann's tensor relationships. The simulation of the effective elastic characteristic demonstrated that the fluid flow between the connected secondary pores has a significant influence only in porous rocks containing cracks (flattened ellipsoids). For pore shapes that are close to spherical, the relative difference between the elastic velocities determined by the DEM method and by the DEM method with Gassmann's corrections does not exceed 2%. Examples of the calculation of elastic moduli for water-saturated dolomite with both isolated and interconnected secondary pores are presented. The simulations were verified by comparison with published experimental