Unit for Digital Signal Processing Applications   Kausar Jahan1, Pala Kalyani2, V Satya Sai3, GRK Prasad4, Syed Inthiyaz5, Sk Hasane Ahammad6 1Department of ECE, Dadi Institute of Engineering and Technology Anakapalle, Andhra Pradesh, India 2Department of ECE, Vardhaman College of Engineering Kacharam, Shamshabad, India 3Department of ECE, Koneru Lakshmaiah Education Foundation Guntur, India-522502 4Department of ECE, Koneru Lakshmaiah Education Foundation Guntur, India-522502 5Department of ECE, Koneru Lakshmaiah Education Foundation Guntur, India-522502 6Department of ECE, Koneru Lakshmaiah Education Foundation Guntur, India-522502   Abstract—The fundamental component used in many of the Digital signal Processing (DSP) applications are Multiply and Accumulation Unit (MAC). In the literature, a multiplier consists of greater number of full adders and half adder in partial product reduction stage, which increases the hardware complexity and critical path delay to MAC unit. To overcome this problem, two novel multipliers are proposed in this article. The proposed multipliers are designed and implemented in hardware, which reduces the circuit complexity and improves the overall performance of the MAC unit with less delay. The proposed multipliers are compared with the 4-bit existing designs and observed that the number of slices Look Up Tables (LUTs) are minimized from 113 to 43, Slices are reduced from 46 to 14, Full Adders (FAs) are lessened from 28 to 23, bonded Input Output Blocks (IOBs) and Half Adders (HAs) were not altered. The time delay is reduced from 14.251ns to 7.876ns. The proposed multipliers are compared in the literature with the 8-bit multiplier, then the number of Slice LUTs are reduced from 510 to 231, Slices are reduced from 218 to 113, FAs are reduced from 120 to 110, HAs are reduced from 56 to 39, time delay is reduced from 26.228ns to12.748ns, but bonded IOBs count remains same. The synthesis and simulations results are verified by using Xilinx ISE 14.7 version tool.