This paper presents a digital holographic method for measurement of periodic asymmetric temperature fields. The method is based on a modified Twyman-Green setup having double sensitivity. For measurement only one precisely synchronized and triggered digital camera is used. The periodicity and self-similarity of each cycle of the measured phenomenon combined with the precisely synchronized camera capture allow one to obtain data later used for three-dimensional (3D) measurement. The reconstruction of 3D temperature field is based on tomographic approach.

No abstract

A method for the measurements of the out-of-plane displacement on the surface of vibrating object is presented herein. This method is based on frequency-shifted time-averaged digital holographic interferometry, employing the principle of phase shifting. This approach allows for significant noise reduction, which results in high sensitivity of measurements. This method makes it possible to measure vibrations with amplitudes in the nanometer range over the whole measured surface. This method was applied to the visualization of the out-of-plane vibration modes of piezoelectric transformers. The amplitude and modal shapes were measured with a very high resolution. Furthermore, aspects influencing the measurement errors are discussed and the measurement results by holographic method were compared with the well-established single-point laser interferometry measurement method.

Abstract. Stereo PIV measurements has been performed behind the inclined plate, angle of attack 5 and 10 deg. Occurrence and dynamics of streamwise structures behind the plate trailing edge have been studied in details using POD method. The streamwise structures are represented by vortices and low-and highvelocity regions, probably streaks. The obtained results support the hypothesis of an airfoil-flow force interaction

There have been tried many types of liquids with different ranges of viscosity values that have been tested to form a single cavitation bubble. The purpose of these experiments was to observe the behaviour of cavitation bubbles in media with different ranges of absorbance. The most of the method was based on spark to induced superheat limit of liquid. Here we used arrangement of the laser-induced breakdown (LIB) method. There were described the set cavitation setting that affects the size bubble in media with different absorbance. We visualized the cavitation bubble with a 60 kHz high speed camera. We used here shadowgraphy setup for the bubble visualization. There were observed time development and bubble extinction in various media, where the size of the bubble in the silicone oil was extremely small, due to the absorbance size of silicon oil.