This paper presents a digital holographic method for measurement of periodic asymmetric temperature fields. The method is based on a modified Twyman-Green setup having double sensitivity. For measurement only one precisely synchronized and triggered digital camera is used. The periodicity and self-similarity of each cycle of the measured phenomenon combined with the precisely synchronized camera capture allow one to obtain data later used for three-dimensional (3D) measurement. The reconstruction of 3D temperature field is based on tomographic approach.

A round robin comparison of freeform form measurements was carried out by the project partners and stakeholders of a European metrology research project. Altogether six measuring instruments were considered: five different (pointwise and areal) optical devices and one tactile device. Three optical freeform surfaces were used for the comparison measurements, where two specimens were measured by five instruments and one specimen by four instruments. In this paper, the evaluation methods and results of this round robin are presented for the three freeform surfaces made from a temperature-stable material, Super Invar ®. The freeforms had diameters of 40 mm, 50 mm and 100 mm and best-fit radii of 39.75 mm (convex), 40.9 mm (convex) and 423.5 mm (concave). For comparison, the bilateral pointwise differences between the available measurements were calculated. The root-mean-square values of these differences ranged from 15 nm to 110 nm (neglecting spherical contributions) and provided an insight into the status of typical freeform measurement capabilities for optical surfaces.

A method for the measurements of the out-of-plane displacement on the surface of vibrating object is presented herein. This method is based on frequency-shifted time-averaged digital holographic interferometry, employing the principle of phase shifting. This approach allows for significant noise reduction, which results in high sensitivity of measurements. This method makes it possible to measure vibrations with amplitudes in the nanometer range over the whole measured surface. This method was applied to the visualization of the out-of-plane vibration modes of piezoelectric transformers. The amplitude and modal shapes were measured with a very high resolution. Furthermore, aspects influencing the measurement errors are discussed and the measurement results by holographic method were compared with the well-established single-point laser interferometry measurement method.

High-precision measurements of mechanical parts' surface topography represent an essential task in many industry sectors. Examples of such tasks are, e.g., precise alignments of opto-mechanical systems, large object deformation measurements, evaluation of object shape, and many others. Today, the standard method used for such measurements is based on use of coordinate measuring machines (CMMs). Unfortunately, CMMs have severe shortcomings: low measurement point density, long measurement time, risk of surface damage, etc. Indeed, the measurement time rapidly increases with the object complexity and with the density of measurement points. In this paper, we have developed a method for surface topography measurements called "frequency sweeping digital holography" (FSDH). Our developed FSDH method is based on the principles of wavelength scanning interferometry. It allows surface topography measurements of objects with a diameter of several hundred of mms and a high axial accuracy reaching 10 μm. The greatest advantage of the presented FSDH is the fact that the surface topology data are captured in a motionless manner by means of a relatively simple setup. This makes the FSDH method a suitable technique for topography measurements of objects with complex geometries made of common materials (such as metals, plastics, etc.), as well as for the characterization of complex composite structures such as acoustic metamaterials, active acoustic metasurfaces, etc. Measurement method principles, setup details, lateral resolution, and axial accuracy are discussed.

The main role of polymer optical fibers is to transmit light or optical signal to a specified spot. In the case of side emitting plastic optical fibers the light leaks out from their surface. This sidelight can be used for creation of optically active textile structures providing opportunities to highlight people and objects without the need for external exposure. Due to the transmission loss, the intensity of radiation emitted in any direction decays exponentially along the fiber axis with increasing distance from the light source. The main aim of this contribution is evaluation of side emitting plastic optical fibers light intensity in dependence on the distance from light source. The special device for measurement of surface and cross section light intensity in various distances from light source was developed. The dependence of surface and cross section light intensity on the distance from light source will be expressed by the exponential type model with attenuation factor as the rate parameter. The influence of the optical fiber type and diameter on the attenuation factor of surface and cross section light intensity will be quantified.