-A Computational Fluid Dynamics model based on the Eulerian formulation for multiphase flow was developed to model the mixing hydrodynamics of two immiscible fluids in a commercial scale static mixer. The two immiscible liquids were condensate and caustic solutions and were considered as two phases that are interpenetrating each other. The aim of this study was to develop a comprehensive Computational Fluid Dynamics model for predicting the impact of hydrodynamic parameters such as length, diameter and the arrangement of the corrugated plates of a static mixer on the degree of mixing and the pressure drop of the mixture. The model has been evaluated by comparing predictions of the degree of mixing and the mixture pressure drop with the same data available for the static mixer of the desulfurization plant of the Kharg petrochemical company. It has been shown that the predictions of the developed model are well adapted to the experimental data.

The computational fluid dynamics modeling of solid particles hydrodynamic based on the Lagrangian framework for diluted solid-gas flow through 90° gas pipeline bend is carried out to discover the effect of particles size distribution on particles flow pattern and their erosive effect on the bend. Particles size distribution has been obtained experimentally by measuring the sizes of solid particles that are flowing through the gas pipelines of Aghajari gas booster station. Also the erosion rate at the outer wall of the bend is predicted. The pipeline bend under study has a pipe diameter of 56 inches and ratios of the bend radius of the curvature to the pipeline diameter of 1.5. For the validation of computational model, firstly, the computational modeling is performed for a published experimental solid-gas flow data. The computational results include radial gas velocity and radial particle velocity profiles on planes which are at different angles through the bend. The comparison between the predicted numerical results and similar experimental data proves that the predictions of the computational model are acceptable. Finally, the particles' size distributions on each plane through the bend and the erosion rate on the outer wall of the bend have been obtained. The maximum rate of erosion is found to be 3.2 nm/s, occurring between 40 and 65° of the bend.

No abstract