Recovery of metals from former industrial areas (also called brownfields) and closed landfill sites, are critical for future sustainable development and reducing the environmental risks they posed. In this study, the feasibility of using bioleaching for resource recovery of raw and secondary raw materials from a former metallurgical site and deposit (PMSD) located in the UK was investigated. Determination of the physicochemical parameters (conductivity, pH, moisture and ash content) that can affect bioleaching performance along with metal content analysis were carried out. Field measurement were also carried out using a portable X-ray fluorescence (pXRF) spectrometer as a rapid measurement tool and compared with the induced coupled mass spectrometry (ICP-MS) results. Fe (469,700 mg/kg), Ca (25,900 mg/kg) and Zn (14,600 mg/kg) were the most dominant elements present in the samples followed by Mn (8,600 mg/kg), Si (3,000 mg/kg) and Pb (2,400 mg/kg). The pXRF results demonstrated minimal variance (<10%) from the ICP-MS results. The preliminary assessment of bioleaching using Acidithiobacillus ferrooxidans at 5% pulp density with 22 g/L energy source and 10% (v/v) inoculum at pH 1.5 showed that 100% of Ti and Cu, 32% of Zn and 24% of Mn was recovered from the sample material, highlighting opportunities for the recovery of such metals through bioleaching processes.

Global net-zero pledges are instigating a societal shift from a fossil-fuel-based economy to renewables. This change facilitates the use of batteries, solar photovoltaic (PV), wind turbines, etc., all of which are underpinned by critical metals. Raw metal extraction is not renewable and environmental pledges made by the government will not be met if this continues. Historic industrial sites contain vast waste stocks. These sites already have an established infrastructure for resource extraction. Applying green solvents and deep eutectic solvents (DES) to such sites for resource recovery alleviates pressure on existing raw extraction processes whilst generating more immediate stores of critical metal along with relatively insignificant environmental impacts. Existing remediation/recovery options have varying metal recovery efficiencies usually combined with high operating costs. Using novel green solvents, such as DES, on historic sites provides an opportunity to recover metals from waste that ordinarily would be looked over. Increased extraction of critical metals from waste material within the UK will reduce reliance on imported metals and improve critical metals security of supply to UK markets and the wider economy The use of these solvents provides an environmentally friendly alternative but also regenerates the legacy of waste from historic industrial sites and consequently implements a circular economy. Adopting the use of green solvents will meet EU environmental pledges, and boost the economy, by recovering metals from legacy sites to meet exponentially growing metal demand.