Perovskite BaTiO3 nanoparticles were synthesized by a hydrothermal method. BaTiO3/chitosan (CS)/Polyvinyl alcohol (PVA) nanofibers with an average diameter of 265.3 ± 52 nm were fabricated via an electrospinning method. The nanofibers were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier transformation infrared spectroscopy (FTIR), and thermal analysis method (TGA). The photoanodes of dye-sensitized solar cells (DSSC) were fabricated based on the BaTiO3/CS/PVA nanofibers. The photovoltaic properties of the cells were calculated based on the current density – voltage curves. The maximum power conversion efficiency of DSSC with CS/PVA/BaTiO3 nanofibers was 0.49% with the natural dye sensitizer extracted from the leaf of the magenta plant.

The presence of hydrogen sulfide (H2S) is an issue for industrial processing, such as gasoline, natural gas, and biogas. In this study, hydroxyapatite (HA) nanoparticles with high purity were successfully extracted from red tilapia fish scales and used as supporting materials for zinc oxide (ZnO) to remove H2S. Various amounts of ZnO decorated on HA nanoparticles were prepared from a zinc nitrate hexahydrate precursor. Powder X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) of the ZnO/HA samples demonstrated the successful synthesis of ZnO/HA with high purity. The scanning electron microscope (SEM) image analysis confirmed the uniform deposition of ZnO on HA nanoparticles which were smaller than 245 nm. The ZnO/HA samples with different ZnO loadings (i.e., 5, 10, and 15 wt%) were used to remove H2S at room temperature. The specific surface area of HA and ZnO/HA determined by the Brunauer-Emmett-Teller (BET) method was 37.022 (m2/g) and 111.609 (m2/g), respectively. The experimental results demonstrated the highest breakthrough sulfur capacity of 26.3 mg S/g with the sorbent ZnO (15 wt%)/HA nanoparticles. This H2S adsorption capacity was the highest capacity ever achieved for ZnO/HA.Therefore, there are great possibilities for effective removal of H2S at the ambient conditions using the ZnO (15 wt%)/HA nanoparticles, where HA nanoparticles could be sustainably extracted from the abundant organic source of red tilapia fish scales.