No abstract

The aim of the work is to substantiate the geometric parameters of the distributor, which are able to provide the maximum range of fertilizer particles in the subclavian space, based on the analysis of all factors affecting the material particles during their transportation to the surface of the distributor. The result of research is to achieve a uniform distribution of fertilizers on the width of the capture and, accordingly, on the area. It is known that the particles of material sent in accordance with the given trajectories in the pre-provided areas of the surface of the furrow formed by the working body, in contact with the soil are significantly redistributed and the meaning of the traditional approach to uniformity is completely lost. In addition, it is necessary to take into account that for placing fertilizers in the soil, in most cases, flat-cutting working bodies are used. For normal operation, in terms of deepening into the ground, they must be installed with a forward tilt at an angle of up to 3°. As a result, the bottom of the furrow, which they form, acquires a conical shape with a slope to the center. In this case, it becomes obvious that the material must be fed not evenly across the width of the working body, and most of it to be directed at a clearly defined distance in the direction perpendicular to its axis. The numerical value of this distance is determined by the nature of the redistribution of the granules as a result of contact with the soil. In the process of rolling the granules or particles to the center, the uniformity of distribution will be restored. In this case, it becomes obvious that the material must be fed not evenly across the width of the working body, and most of it to be directed at a clearly defined distance in the direction perpendicular to its axis. The numerical value of this distance is determined by the nature of the redistribution of the granules as a result of contact with the soil. In the process of rolling the granules or particles to the center, the uniformity of distribution will be restored. In this regard, there is a need to solve the problem of ensuring the maximum range of particles in the transverse direction using the simplest geometry of the distributor surface. In our opinion, such a surface can be a prism. In the article the results of theoretical research of process of portage and distributing of granules of mineral fertilizers are resulted after a reflection from the plane of reflection in sub paw space of trivial cutting of working organ. Geometrical parameters and corners of location of reflecting plane are grounded. The obtained dependences allow to reasonably establish geometrical parameters of the distributor which will provide the set range of flight of particles of material for working bodies of various width of capture and to reach desirable result taking into account laws of their redistribution at contact with soil.

No abstract

The article provides an analysis of the influence of factors that influence the increase in the yield of agricultural crops, the importance of using mineral fertilizers and their effect on plants is indicated. An analysis of the existing methods of applying mineral fertilizers was carried out. The methods of applying fertilizers to the soil are considered, the advantages and disadvantages of these methods are given. The results of the scientists' research on the placement of mineral fertilizers applied by the method of surface scattering in the soil horizons after their cultivation by tillage tools are presented. Attention is focused on the local method of applying fertilizers, combined with surface cultivation of the soil, with combined tools. The methods of placement of mineral fertilizers, introduced by the intrasoil method, relative to the root system of cultivated plants and their effect on plants are considered. It was determined that the priority method of fertilizing is in-soil combined with surface tillage. An analysis of tillage tools that can be used for this operation is given. The design of the combined disk tool designed for this technological operation is presented. Design solutions that provide quality performance indicators of the proposed tool are indicated and attention is focused on its advantages over existing analogues. It has been established that a more promising way of increasing soil fertility and crop yield is the local application of granular mineral fertilizers combined with surface tillage. It is expected that the use of the proposed combined working body will allow to reduce the time for the execution of works due to the combination of operations of loosening the soil, applying fertilizers and their earnings, reducing the costs of mineral fertilizers and the general economic costs of obtaining crops.