Optically resonant donor polymers can exploit a wider range of the solar spectrum effectively without a complicated tandem design in an organic solar cell. Ultrafast Förster resonance energy transfer (FRET) in a polymer-polymer system that significantly improves the power conversion efficiency in bulk heterojunction polymer solar cells from 6.8% to 8.9% is demonstrated, thus paving the way to achieving 15% efficient solar cells.

We have synthesized and characterized a series of triphenylamine-based hole-transport materials (HTMs), and studied their function in solid-state dye sensitized solar cells (ss-DSSCs). By increasing the electron-donating strength of functional groups (-H <-Me <-SMe <-OMe) we have systematically shifted the oxidation potential and ensuing photocurrent generation and open-circuit voltage of the solar cells. Correlating the electronic properties of the HTM to the device operation highlights a significant energy offset required between the Dye-HTM highest occupied molecular orbital (HOMO) energy levels. From this study, it is apparent that precise control and tuning of the oxidation potential is a necessity, and usually not achieved with most HTMs developed to date for ss-DSSCs. To significantly increase the efficiency of solid-state DSSCs understanding these properties, and implementing dye-HTM combinations to minimize the required HOMO offset is of central importance.

Lead halide perovskites have displayed the highest solar power conversion efficiencies of 23% but the toxicity issues of these materials need to be addressed. Lead‐free perovskites have emerged as viable candidates for potential use as light harvesters to ensure clean and green photovoltaic technology. The substitution of lead by Sn, Ge, Bi, Sb, Cu and other potential candidates have reported efficiencies of up to 9%, but there is still a dire need to enhance their efficiencies and stability within the air. A comprehensive review is given on potential substitutes for lead‐free perovskites and their characteristic features like energy bandgaps and optical absorption as well as photovoltaic parameters like open‐circuit voltage (VOC), fill factor, short‐circuit current density (J SC), and the device architecture for their efficient use. Lead‐free perovskites do possess a suitable bandgap but have low efficiency. The use of additives has a significant effect on their efficiency and stability. The incorporation of cations like diethylammonium, phenylethyl ammonium, phenylethyl ammonium iodide, etc., or mixed cations at different compositions at the A‐site is reported with engineered bandgaps having significant efficiency and stability. Recent work on the advancement of lead‐free perovskites is also reviewed.

Naphthalene diimide−bithiophene P(NDI2OD-T2) is a well-known donor−acceptor polymer, previously explored as n-type material in all-polymer solar cells (all-PSCs) and organic field effect transistor (OFETs) applications. The optical, bulk, electrochemical, and semiconducting properties of P(NDI2OD-T2) polymer were tuned via random incorporation of perylene diimide (PDI) as coacceptor with naphthalene diimide (NDI). Three random copolymers containing 2,2′-bithiophene as donor unit and varying compositions of naphthalene diimide (NDI) and perylene diimide (xPDI, x = 15, 30, and 50 mol % of PDI) as two mixed acceptors were synthesized by Stille coupling copolymerization. Proton NMR spectra recorded in CDCl 3 showed that the π−π stacking induced aggregation among the naphthalene units could be successfully disrupted by the random incorporation of bulky PDI units. The newly synthesized random copolymers were investigated as electron acceptors in BHJ all-PSCs, and their performance was compared with P(NDI2OD-T2) as reference polymer. An enhanced PCE of 5.03% was observed for BHJ all-PSCs (all-polymer solar cells) fabricated using NDI-Th-PDI30 as acceptor and PTB7-Th as donor, while the reference polymer blend with the same donor polymer exhibited PCE of 2.97% efficiency under similar conditions. SCLC bulk carrier mobility measured for blend devices showed improved charge mobility compared to reference polymer, with PTB7-Th:NDI-Th-PDI30 blend device exhibiting the high hole and electron mobility of 4.2 × 10 −4 and 1.5 × 10 −4 cm 2 /(V s), respectively. This work demonstrates the importance of molecular design via random copolymer strategy to control the bulk crystallinity, compatibility, blend morphology, and solar cell performance of n-type copolymers.