We report the measurement of the frequency noise power spectral density of a quantum cascade laser emitting at 2.5THz. The technique is based on heterodyning the laser emission frequency with a harmonic of the repetition rate of a near-infrared laser comb. This generates a beatnote in the radio frequency range that is demodulated using a tracking oscillator allowing measurement of the frequency noise. We find that the latter is strongly affected by the level of optical feedback, and obtain an intrinsic linewidth of ~230Hz, for an output power of 2mW.

International audienceWe demonstrate a coherent imaging system based on a terahertz (THz) frequency quantum cascade laser (QCL) phase-locked to a near-infrared fs-laser comb. The phase locking enables coherent electro-optic sampling of the continuous-wave radiation emitted by the QCL through the generation of a heterodyne beat-note signal. We use this beat-note signal to demonstrate raster scan coherent imaging using a QCL emitting at 2.5 THz. At this frequency the detection noise floor of our system is of 3 pW/Hz and the long-term phase stability is <3°/h, limited by the mechanical stability of the apparatus

We demonstrate the operation of coupled-cavity terahertz frequency quantum-cascade lasers composed of two sub-cavities separated by an air gap realized by optical lithography and dry etching. This geometry allows stable, single mode operation with typical side mode suppression ratios in the 30-40 dB range. We employ a transfer matrix method to model the mode selection mechanism. The obtained results are in good agreement with the measurements and allow prediction of the operating frequency. V C 2014 AIP Publishing LLC.[http://dx