No abstract

Tailings dams are special constructions that are part of a complex of works related to the installations for preparing mining masses. These constructions play a role in the mechanical treatment of wastewater and the safe storage of sterile material resulting from ore processing. The closing and greening of tailings dams is achieved taking into account the general stability of the pond and its related constructions, as well as the integration into the surrounding environment of the surfaces occupied by mining waste deposits (tailings dams). This study presents the results of the hydrogeotechnical and stability study carried out on the Gura Roşiei tailings dam location. This analysis aims to evaluate the stability degree of the three compartments that comprise the tailings deposit in order to carry out the closing and greening works of the tailings dam, and to conclude whether the idea of raising them by 1.5–2 m with tailings is feasible. This study was based on field observations, geotechnical drilling, and physical–chemical analyses of the collected samples. Due to the shallow depth, the drilling could not highlight a hydrostatic level except for the areas with excess humidity, areas represented by certain lenticular intercalations of sandy dust that yield water very slowly. These areas are not continuous and cannot define a reference hydrostatic level. All situations were analyzed by four different methods that satisfy the static equilibrium of forces or moments (Bishop and Janbu) or simultaneously of forces and moments (Spencer and Morgenstern–Price). From the point of view of the stability calculations performed in the hypothesis in which the three ponds become active for the storage of tailings, assuming a corresponding piezometric level, the resulting safety factors are relatively close to the standard values (Fs ≥ 1.4) for the static analysis, and in seismic conditions, they are at the limit of equilibrium. The NE slope of pond No. 2 shows values below the standard safety limit for this type of work. Moreover, tailings dam No. 3 presented from the calculations as being totally inadequate for the elevation. From the obtained results, it was found that the location formed by the three compartments that comprise the Gura Roşiei tailings dam presents major disadvantages for a future storage of flotation tailings, being at the same time an imminent danger to the environment. Due to its reduced capacity to release water from its pores, the settled material is still in a saturated state, and it is assumed that the foundation land, comprised of the terrace deposits of the Abrudel River, is clogged at the interface with the settled material and unable to naturally drain the excess moisture from the dam’s body.

No abstract

No abstract

The rapid development of science and technology, and the restructuring of the mining extraction industry, bring about profound changes in the structure and complexity of technological equipment used in mining. In this paper, the Reliability Centered Maintenance (RCM) method has been applied to analyze the components of the KSW-460NE shearer machine, which fails quite frequently. The cutter drums do not match from a constructive point of view, and the concrete operation conditions, alongside the picks (being in direct contact with coal and hard inclusions) and guides are submitted to intense abrasion wear, showing a great number of failures. The data collected following the machine’s exploitation allowed parameter determination characterizing the reliability of the components mentioned, the manner of failure, and the effects. Using calculation methods, it has been possible to facilitate the interpretation of the result in view of establishing measures required to improve maintenance of the dominant components of the machine, determining replacement intervals, in accordance with an imposed reliability and maintainability. The results of the study assist in the choice of suitable hardening materials for the reconditioning of cutter drums and guides that are necessary for practical trials, by which their operating times, and replacement intervals, respectively, might be additionally improved.