The thermal stability of a high-quality hydrotreated Jet-A fuel, an
average-quality straight-run Jet-A fuel, and several blends of each fuel has been studied during
flow through a single-pass tubular heat exchanger at 185 °C. The goal was to obtain
fundamental information
concerning the thermal stability of fuel blends using dynamic
isothermal methods. Autoxidation
was tracked as a function of stress duration by measurements of
dissolved oxygen and
hydroperoxides; insoluble formation was determined by measurements of
the average surface
deposition rate and the total quantity of bulk insolubles collected on
in-line filters. On the basis
of several thermooxidative stability criteria, some of the blends were
found to be less stable than
either neat fuel. Furthermore, benefits of blending were not
realized until the lesser-quality
fuel had been diluted more than 8-fold. The implications of
blending high- and lesser-quality
fuels are discussed in the context of autoxidation and insoluble
formation.
Recently it has been reported that autoxidation of a Jet-A fuel which occurs during passage through heated stainless-steel tubing is accelerated by the tubing walls and that this effect is mitigated as the surface becomes fouled. To investigate the generality of this finding, we have studied the depletion of dissolved oxygen in 16 aviation fuels in a single-pass tubular heat exchanger. Experimental conditions of temperature and tube dimension were held constant, but the chemical composition of the inner wall surfaces was varied. Reaction was compared in commercial stainless-steel (304) tubes and in passivated or surface-treated (Silcosteel) tubes which are noted for their inert inner walls. The aviation fuels selected for study ranged from the highly thermally stable JPTS to an unstable Cu-doped Jet-A. The fuels contained a fixed amount of oxygen (air-saturated at room temperature) and were stressed under identical conditions at 185 °C during passage through 0.216-cm-i.d. tubing. Results reported herein show that autoxidation occurring as fuel flows through stainless-steel tubes is accelerated as compared to that occurring in treated tubes. The magnitude of this effect is fuel dependent, ranging from a low of 10-20% (barely detectable) to ∼75%. The role of surfaces in catalyzing aviation-fuel autoxidation in narrow-bore tubing and possible ramifications with regard to surface fouling in aircraft fuel lines are discussed.
The thermooxidative stability of blends of a straight-run Jet-A fuel
(POSF-2827) and a
paraffinic/cycloparaffinic solvent (Exxsol D-80) has been studied in a
single-pass tubular heat
exchanger operated isothermally at 185 °C. Autoxidation of most
blends is found to be
significantly slower than that of either fuel or solvent. Surface
fouling relative to the solvent is
increased by addition of jet fuel; this is attributed to reactions of
natural antioxidants present in
the fuel. Surface fouling relative to the jet fuel is reduced
following paraffin addition under
conditions of partial O2 conversion; this is attributed to
a lower initiation rate as the concentration
of aromatics is reduced. The impact of these findings for
mitigation of surface fouling in aircraft
fuel lines is discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.